{"title":"Supports de pompes à essence immergées Radium","description":"\u003cp\u003eModules de pompe à essence immergée (Fuel Pump Hangers) sur mesure par Radium Engineering. Remplacement direct des unités d'origine pour réservoir OEM, permettant l'installation de plusieurs pompes haut débit (Walbro, Ti Automotive, AEM) avec connecteurs électriques étanches.\u003c\/p\u003e","products":[{"product_id":"radium-fuel-pump-hanger-toyota-supra-mk4","title":"Radium - Support de pompe à essence pour Toyota Supra MK4 (JZA80)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Pump Hanger for the Toyota Supra MK4 (JZA80)\u003c\/strong\u003e completely replaces the restrictive factory fuel pump assembly, allowing builders to run high-volume aftermarket fuel pumps inside the OEM fuel tank. Conçu spécifiquement pour high-horsepower naturally aspirated and turbocharged 2JZ builds, this billet hanger prevents fuel starvation under aggressive acceleration and cornering.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Pump In-Tank Capability:\u003c\/strong\u003e Accommodates 1, 2, or 3 high-flow fuel pumps depending on the chosen configuration, with dedicated wiring pass-throughs for staged pump activation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInternal Fuel Collector Box:\u003c\/strong\u003e Features a high-capacity collector box that keeps the fuel pump pickups continuously submerged, preventing air ingestion at low tank levels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Flow Merged Outlets:\u003c\/strong\u003e Replaces narrow factory hard-lines with high-flow -8AN ORB pump ports for massive flow capacity without restriction.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Level Sender Compatibility:\u003c\/strong\u003e Engineered to seamlessly retain the OEM fuel level float assembly to maintain accurate dashboard fuel gauge readings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eE85 \u0026amp; Race Gas Safe:\u003c\/strong\u003e CNC machined from 6061-T6 billet aluminum, black anodized for complete corrosion resistance against alcohol-based fuels (E85\/ethanol\/methanol).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1993–1998 Toyota Supra Turbo (JZA80) - 2JZ-GTE\u003c\/li\u003e\n  \u003cli\u003e1993–1998 Toyota Supra Non-Turbo (JZA80) - 2JZ-GE\u003c\/li\u003e\n  \u003cli\u003e1993–2002 Toyota Supra (JDM RHD Models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps, fuel filter kits, and plumbing lines are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 (39mm)","offer_id":50518270541982,"sku":"20-1510","price":839.95,"currency_code":"CAD","in_stock":true},{"title":"Ti Automotive E5LM (Brushless)","offer_id":50518270574750,"sku":"20-1511","price":839.95,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285\/295 (Hellcat \/ E85)","offer_id":50518270607518,"sku":"20-1512","price":869.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-supra-mk4-20-1510.jpg?v=1790114468"},{"product_id":"radium-fuel-pump-hanger-late-model-subaru","title":"Radium - Support de pompe à essence pour Late Model Subaru (WRX \/ STI \/ Legacy \/ Forester)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering In-Tank Fuel Pump Hanger for Late Model Subaru\u003c\/strong\u003e provides drop-in multi-pump capability for high-power Subaru applications. It completely replaces the OEM fuel pump carrier, allowing 1 or 2 high-flow aftermarket pumps to be safely submerged inside the tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Pump Capacity:\u003c\/strong\u003e Supports 1 or 2 high-flow pumps with isolated electrical terminals for staged fuel delivery.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual 1-Way Fill Valves:\u003c\/strong\u003e The integrated collector box uses twin 1-way fill valves to trap fuel around the pump pickups during high G-force cornering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVenturi Jet Scavenge Pump:\u003c\/strong\u003e Retains proper saddle-tank fuel transfer without restricting fuel return pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains Factory Sensors:\u003c\/strong\u003e Designed to mount the OEM Subaru fuel level float sensor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet Anodized Construction:\u003c\/strong\u003e CNC machined 6061-T6 aluminum, anodized black and laser etched for durability with E85 and high-octane race fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008–2021 Subaru WRX STI (GR, GV, VA) - EJ257\u003c\/li\u003e\n  \u003cli\u003e2008–2014 Subaru WRX (GE, GH) - EJ255\u003c\/li\u003e\n  \u003cli\u003e2015–2021 Subaru WRX (VA) - FA20DIT (Requires optional adapter 20-0850)\u003c\/li\u003e\n  \u003cli\u003e2005–2009 Subaru Legacy GT - EJ255\u003c\/li\u003e\n  \u003cli\u003e2009–2018 Subaru Forester XT - EJ255 \/ FA20DIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and vehicle-specific plumbing kits are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 (39mm)","offer_id":50518270640286,"sku":"20-0780-00","price":753.0,"currency_code":"CAD","in_stock":true},{"title":"Deatschwerks DW400 (46mm)","offer_id":50518270673054,"sku":"20-0781-00","price":782.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 (Hellcat \/ E85)","offer_id":50518270705822,"sku":"20-0782-00","price":782.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-subaru-late-20-0780-00.jpg?v=1790114476"},{"product_id":"radium-fuel-pump-hanger-early-subaru-saab-9-2x","title":"Radium - Support de pompe à essence pour Early Subaru \/ Saab 9-2X (GD\/GG)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering In-Tank Fuel Pump Hanger for Early Subaru WRX\/STI and Saab 9-2X\u003c\/strong\u003e is engineered for the legendary GD\/GG chassis. It replaces the stock sender unit with a precision billet dual-pump assembly that cures the fuel starvation issues common to track-driven Subarus.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Pump Compatibility:\u003c\/strong\u003e Holds up to 2 high-flow pumps with independent stainless steel wiring studs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet Starvation Baffling:\u003c\/strong\u003e Traps return fuel and utilizes engineered check valves to prevent pump cavitation in sweeping turns.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Fuel Level Float Retention:\u003c\/strong\u003e Re-uses the factory level float arm for reliable in-dash fuel monitoring.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Flow AN Ports:\u003c\/strong\u003e Replaces corroded OEM steel lines with female -8AN ORB outlet and -6AN ORB return.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% E85 Compatible:\u003c\/strong\u003e Machined from billet 6061 aluminum and anodized for lifetime reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2002–2007 Subaru Impreza WRX (GD\/GG) - EJ205 \/ EJ255\u003c\/li\u003e\n  \u003cli\u003e2004–2007 Subaru Impreza WRX STI (GD) - EJ257\u003c\/li\u003e\n  \u003cli\u003e2005–2006 Saab 9-2X Aero - EJ205 \/ EJ255\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and lines sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 (39mm)","offer_id":50518270738590,"sku":"20-0340-00","price":912.95,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 (Hellcat \/ E85)","offer_id":50518270771358,"sku":"20-0342-00","price":912.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-subaru-early-20-0340-00.jpg?v=1790114482"},{"product_id":"radium-fuel-pump-hanger-nissan-r35-gt-r","title":"Radium - Support de pompe à essence pour Nissan R35 GT-R (VR38DETT)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Triple Pump Fuel Hanger for the Nissan R35 GT-R\u003c\/strong\u003e is the ultimate in-tank fuel delivery upgrade for VR38DETT engines producing well in excess of 1,500+ horsepower. Designed to house up to \u003cstrong\u003ethree high-flow pumps\u003c\/strong\u003e inside the factory saddle fuel tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTriple In-Tank Pump Architecture:\u003c\/strong\u003e Can be run with 1, 2, or 3 fuel pumps with staged activation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Siphon Jet Preservation:\u003c\/strong\u003e Features a custom engineered venturi jet pump system to properly transfer fuel between tank halves without back-pressure issues.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Merged 8AN ORB Outlets:\u003c\/strong\u003e Supplies enormous fuel volume directly to high-capacity fuel rails.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Cavitation Trap Doors:\u003c\/strong\u003e Integrated Viton flapper valves keep the pumps submerged even during high-G acceleration and launches.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Fitment:\u003c\/strong\u003e Mounts through the OEM fuel tank opening with no cutting or welding required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2009–2024 Nissan R35 GT-R (CBA, DBA, EBA, 4BA) - VR38DETT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and plumbing feed kits are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Triple pompe Capable (Pumps Sold Separately)","offer_id":50518270804126,"sku":"20-0572","price":1188.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-r35-gtr-20-0572.jpg?v=1790114487"},{"product_id":"radium-fuel-pump-hanger-toyota-gr-supra-mk5-bmw-z4","title":"Radium - Support de pompe à essence pour Toyota GR Supra MK5 \/ BMW Z4 (B58)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Pump Hanger for Toyota GR Supra MK5 (A90\/A91) and BMW G29 Z4\u003c\/strong\u003e upgrades the factory in-tank pump assembly with high-flow aftermarket pumps (Walbro 450\/525 or Bosch BR540). Essential for high-horsepower B58 port-injection and high-boost turbo builds.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupports Extreme Boost Builds:\u003c\/strong\u003e Delivers continuous fuel flow for high-pressure direct injection plus secondary port injection systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Fuel Tank Integration:\u003c\/strong\u003e Mounts through the OEM fuel tank ring and retains original level sensor functionality.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Flow -8AN ORB Port:\u003c\/strong\u003e Massive increase in flow compared to restrictive OEM quick-disconnect barbs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Billet Construction:\u003c\/strong\u003e Machined 6061-T6 aluminum, fully anodized for complete compatibility with E85 and pump gas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2020+ Toyota GR Supra 3.0 (A90\/A91) - BMW B58 3.0L Turbo\u003c\/li\u003e\n  \u003cli\u003e2021+ Toyota GR Supra 2.0 - BMW B48 2.0L Turbo\u003c\/li\u003e\n  \u003cli\u003e2019+ BMW Z4 M40i \u0026amp; sDrive30i (G29)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and plumbing kits sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Single High-Flow Pump Drop-In","offer_id":50518270836894,"sku":"20-0760","price":579.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-supra-mk5-20-0760.jpg?v=1790114490"},{"product_id":"radium-fuel-pump-hanger-fr-s-brz-gt86-gr86","title":"Radium - Support de pompe à essence pour Scion FR-S \/ Subaru BRZ \/ Toyota GT86 \u0026 GR86","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering In-Tank Fuel Pump Hanger for Scion FR-S, Subaru BRZ, Toyota GT86, and 2022+ GR86\u003c\/strong\u003e has been completely re-engineered for superior fuel scavenging and drop-in installation. It replaces the factory fuel module, allowing 1 or 2 high-performance fuel pumps to run without fuel surge on track.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Anti-Surge Collector Box:\u003c\/strong\u003e CNC machined 1-piece aluminum collector incorporates a 355 LPH 1-way fill valve that traps fuel around pump pickups.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRe-Engineered Venturi Jet Siphon:\u003c\/strong\u003e Eliminates factory siphon restriction to safely run high-flow pumps without increasing idle fuel pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Pump Ready:\u003c\/strong\u003e Pre-wired with dual high-current electrical feed-throughs for single or staged pump operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Level Float Retained:\u003c\/strong\u003e Keeps factory instrument cluster fuel gauge accurate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Flow AN Ports:\u003c\/strong\u003e Features 8AN ORB pump outlet and 6AN ORB return.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2013–2016 Scion FR-S (ZN6) - FA20\u003c\/li\u003e\n  \u003cli\u003e2013–2020 Subaru BRZ (ZC6) - FA20\u003c\/li\u003e\n  \u003cli\u003e2017–2020 Toyota 86 \/ GT86 (ZN6) - FA20\u003c\/li\u003e\n  \u003cli\u003e2022+ Toyota GR86 (ZN8) - FA24D\u003c\/li\u003e\n  \u003cli\u003e2022+ Subaru BRZ (ZD8) - FA24D\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and plumbing kits sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"2013-2021 Scion FR-S \/ Subaru BRZ \/ Toyota 86","offer_id":50518270869662,"sku":"20-1073","price":767.95,"currency_code":"CAD","in_stock":true},{"title":"2022+ Toyota GR86 \/ Subaru BRZ","offer_id":50518270902430,"sku":"20-1074","price":767.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-brz-gen1-20-1073.jpg?v=1790114494"},{"product_id":"radium-fuel-pump-hanger-mitsubishi-evo-7-8-9","title":"Radium - Support de pompe à essence pour Mitsubishi EVO 7-9 (CT9A)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering In-Tank Fuel Pump Hanger for Mitsubishi EVO 7, 8, and 9 (CT9A)\u003c\/strong\u003e is the ultimate solution for high-horsepower 4G63 builds. It replaces the factory fuel assembly, providing dual-pump capacity and solving the notorious Evo fuel surge in right-hand turns.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Pump In-Tank Housing:\u003c\/strong\u003e Safely accommodates 1 or 2 high-flow pumps with independent electrical terminals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Surge Flapper Valves:\u003c\/strong\u003e Keeps fuel locked around pump inlets even under extreme lateral G-forces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePreserves Saddle-Tank Siphon:\u003c\/strong\u003e High-efficiency siphon pump preserves factory fuel leveling across the driveshaft tunnel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-8AN ORB Porting:\u003c\/strong\u003e Drastically flows more fuel than restrictive OEM steel tubes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eE85 \u0026amp; Race Gas Certified:\u003c\/strong\u003e Type-II black anodized 6061 billet aluminum with FKM O-ring seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2002 Mitsubishi Lancer Evolution VII (CT9A) - 4G63\u003c\/li\u003e\n  \u003cli\u003e2003–2005 Mitsubishi Lancer Evolution VIII (CT9A) - 4G63\u003c\/li\u003e\n  \u003cli\u003e2005–2007 Mitsubishi Lancer Evolution IX (CT9A) - 4G63\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and plumbing kits sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"AEM 50-1220 \/ Deatschwerks DW440","offer_id":50518270935198,"sku":"20-1340","price":767.95,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 (Hellcat \/ E85)","offer_id":50518270967966,"sku":"20-1342","price":767.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-evo-789-20-1340.jpg?v=1790114500"},{"product_id":"radium-fuel-pump-hanger-mitsubishi-evo-x","title":"Radium - Support de pompe à essence pour Mitsubishi EVO X (CZ4A)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering In-Tank Fuel Pump Hanger for Mitsubishi EVO X (CZ4A)\u003c\/strong\u003e completely replaces the OEM plastic fuel module. Conçu spécifiquement pour high-power 4B11T turbo builds, this billet assembly houses up to two high-flow fuel pumps and completely eliminates high-G fuel starvation.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Pump Versatility:\u003c\/strong\u003e Available in fitments for standard 39mm pumps, large 46mm DW400 pumps, Hellcat Walbro 450\/525s, or brushless Ti Automotive pumps.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrapped Fuel Collector:\u003c\/strong\u003e Retains return fuel around the pump strainers for uninterrupted delivery under hard cornering and braking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Current Terminals:\u003c\/strong\u003e Independent stainless steel electrical pass-throughs support high-amperage fuel pump circuits without melting OEM connectors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains OEM Sensors:\u003c\/strong\u003e Fully Compatible avec the factory fuel level float and pressure sensor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet Construction:\u003c\/strong\u003e Precision CNC machined from 6061-T6 aluminum and black anodized for total ethanol\/E85 resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008–2015 Mitsubishi Lancer Evolution X (CZ4A) - 4B11T\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and plumbing kits sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1220 (39mm)","offer_id":50518271000734,"sku":"20-1640","price":767.95,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 (Hellcat \/ E85)","offer_id":50518271033502,"sku":"20-1642","price":767.95,"currency_code":"CAD","in_stock":true},{"title":"Brushless Fuel Pumps (Ti Automotive E5LM)","offer_id":50518271066270,"sku":"20-1643","price":767.95,"currency_code":"CAD","in_stock":true},{"title":"Deatschwerks DW400 (46mm)","offer_id":50518271099038,"sku":"20-1644","price":767.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-evo-x-20-1640.jpg?v=1790114508"},{"product_id":"radium-fuel-hanger-surge-tank-nissan-350z-g35-g37","title":"Radium - Fuel Hanger Surge Tank pour Nissan 350Z \/ Infiniti G35\/G37\/Q50\/Q60","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Surge Tank (FHST) for Nissan 350Z, 370Z, and Infiniti G35\/G37\/Q50\/Q60\u003c\/strong\u003e is an innovative, all-in-one in-tank surge tank. It combines an enclosed surge tank and multi-pump hanger directly inside the factory fuel tank, curing severe fuel starvation issues during drifting, road racing, and drag launches without needing an external surge tank in the trunk.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrue In-Tank Surge Tank:\u003c\/strong\u003e Features an enclosed chamber kept constantly full by return fuel and OEM siphon scavenging, keeping pumps 100% submerged at all times.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupports Staged Multi-Pumps:\u003c\/strong\u003e Accommodates 1 or 2 high-flow pumps with independent electrical feeds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDead-Head or Return Style:\u003c\/strong\u003e Can be used with the built-in regulator or converted to an external return system with optional block-off kit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOdor-Free Cabin:\u003c\/strong\u003e Because the surge tank resides inside the factory fuel tank, there are zero fuel odors inside the vehicle cabin.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Billet Construction:\u003c\/strong\u003e Type-II anodized 6061-T6 aluminum for full E85 \/ race Compatibilité carburant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2003–2008 Nissan 350Z (Z33) - VQ35DE \/ VQ35HR\u003c\/li\u003e\n  \u003cli\u003e2003–2007 Infiniti G35 Coupe \u0026amp; Sedan - VQ35DE \/ VQ35HR\u003c\/li\u003e\n  \u003cli\u003e2008–2013 Infiniti G37 Coupe \u0026amp; Sedan - VQ37VHR\u003c\/li\u003e\n  \u003cli\u003e2014+ Infiniti Q50 \u0026amp; Q60 - VQ37VHR \/ VR30DDTT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 (39mm)","offer_id":50518271197342,"sku":"20-1830","price":1086.95,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ DW440 (Hellcat \/ E85)","offer_id":50518271230110,"sku":"20-1832","price":1086.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fhst-350z-g35-20-1830.jpg?v=1790114516"},{"product_id":"radium-fuel-pump-hanger-bmw-e46-m3","title":"Radium - Support de pompe à essence pour BMW E46 3-Series \u0026 M3 (S54 \/ M54)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering In-Tank Fuel Pump Hanger for BMW E46\u003c\/strong\u003e delivers drop-in multi-pump fuel delivery for BMW E46 chassis (including 323i, 325i, 328i, 330i, and E46 M3 S54). Replaces the stock plastic sender module with a high-flow billet aluminum hanger that cures fuel starve on track.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Pump Compatibility:\u003c\/strong\u003e Holds up to 2 high-flow fuel pumps to satisfy the high fuel demands of turbocharged or supercharged S54 and M54 builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet Collector Baffle:\u003c\/strong\u003e Internal reservoir ensures constant fuel submersion around the pump inlets during high-G track driving.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaintains Factory Siphon \u0026amp; Senders:\u003c\/strong\u003e Seamlessly integrates with the BMW dual-saddle tank transfer system and OEM fuel level sensor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Flow AN Porting:\u003c\/strong\u003e -8AN ORB outlet and -6AN ORB return replace restrictive factory push-connect barbs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% E85 Compatible:\u003c\/strong\u003e CNC machined 6061 billet aluminum anodized black with stainless steel hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Vehicle Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2006 BMW M3 (E46) - S54 3.2L\u003c\/li\u003e\n  \u003cli\u003e1999–2005 BMW 3-Series (323i, 325i, 328i, 330i - E46) - M52TU \/ M54\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings and hose ends are sold separately. Fuel pumps and plumbing kits sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eRecommended companion: Pair directly with the \u003ca href=\"\/fr\/products\/radium-fuel-hanger-plumbing-kit-for-bmw-e46-3-series-m3\"\u003eRadium Fuel Hanger Plumbing Kit for BMW E46 (20-1175)\u003c\/a\u003e for a pre-crimped PTFE feed\/return line system and high-flow underbody filter.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Multi-Pump Capable Drop-In","offer_id":50518271262878,"sku":"20-1180","price":796.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-bmw-e46-20-1180.jpg?v=1790114521"},{"product_id":"radium-fuel-hanger-plumbing-kit-toyota-supra-mk4","title":"Radium - Kit de plomberie pour support de pompe pour Toyota Supra MK4 (JZA80)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for Toyota Supra MK4 (JZA80)\u003c\/strong\u003e includes everything required to plumb the complete fuel delivery system between the Radium fuel pump hanger and the fuel rail in the JZA80 Supra. Engineered to work seamlessly with the Radium 2JZ fuel rail (20-0215) and aftermarket fuel pressure regulators.\u003c\/p\u003e\n\n\u003ch3\u003eKit Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-Made -8AN PTFE Feed Line:\u003c\/strong\u003e Runs from the fuel pump hanger to the included chassis-mounted fuel filter.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-Made -10AN Line:\u003c\/strong\u003e Feeds directly from the filter outlet to the fuel rail inlet for maximum volume.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e-6AN E85 Return Hose:\u003c\/strong\u003e Runs from the fuel pressure regulator back to the hanger return port.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Bolt-On Underbody Filter Mount:\u003c\/strong\u003e Includes Radium billet aluminum 60mm filter clamp and Supra-specific chassis bracket.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet Line Retainers:\u003c\/strong\u003e Radium green anodized aluminum clamps secure lines neatly along factory underbody pathways.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Designed to work best with Radium 2JZ fuel rail (20-0215). Not Compatible avec OEM 2JZ fuel rail.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50518271328414,"sku":"20-0415-03","price":695.0,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50518271361182,"sku":"20-0415-05","price":666.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-plumbing-kit-supra-mk4-20-0415.jpg?v=1790114527"},{"product_id":"radium-fuel-hanger-plumbing-kit-late-subaru-wrx-sti","title":"Radium - Kit de plomberie pour support de pompe pour Late Model Subaru (08-21 WRX \/ STI)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for 2008–2021 Subaru WRX and STI\u003c\/strong\u003e provides pre-fabricated PTFE fuel lines and an underbody high-flow fuel filter kit Conçu spécifiquement pour the GR, GV, and VA chassis. Converts restrictive OEM fuel lines to high-flow -8AN feed and -6AN return.\u003c\/p\u003e\n\n\u003ch3\u003eKit Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Chassis PTFE Lines:\u003c\/strong\u003e Pre-crimped -8AN feed and -6AN return lines resistant to vapor bleed-through and 100% Compatible avec E85.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-On Underbody Filter Mount:\u003c\/strong\u003e Mounts a high-flow Radium fuel filter in the factory undercarriage location using billet brackets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Connection:\u003c\/strong\u003e Plumbs directly to Radium late-model Subaru fuel pump hangers (20-0780\/781\/782).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50518271393950,"sku":"20-0629-03","price":724.0,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50518271426718,"sku":"20-0629-05","price":695.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-plumbing-subaru-late-20-0629.jpg?v=1790114531"},{"product_id":"radium-fuel-hanger-feed-kit-nissan-r35-gt-r","title":"Radium - Kit d'alimentation pour support de pompe pour Nissan R35 GT-R (VR38DETT)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Feed Kit for Nissan R35 GT-R\u003c\/strong\u003e delivers massive fuel flow from the Radium R35 fuel pump hanger directly into high-output VR38 fuel rails. Engineered to eliminate fuel delivery restrictions on builds exceeding 1,000 to 1,500+ horsepower.\u003c\/p\u003e\n\n\u003ch3\u003eKit Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual -8AN PTFE Feed Architecture:\u003c\/strong\u003e Merges both pump outputs through pre-crimped high-pressure PTFE lines.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChassis-Specific Filter Mount:\u003c\/strong\u003e Mounts a high-capacity Radium fuel filter cleanly under the vehicle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible avec E85 \u0026amp; Ethanol:\u003c\/strong\u003e Complete resistance against alcohol degradation and fuel vapor permeation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50518271459486,"sku":"20-0851-03","price":956.0,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50518271492254,"sku":"20-0851-05","price":927.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-feed-kit-r35-gtr-20-0851.jpg?v=1790114535"},{"product_id":"radium-fuel-hanger-plumbing-kit-toyota-gr-supra-mk5-bmw-z4","title":"Radium - Kit de plomberie pour support de pompe pour Toyota GR Supra MK5 \/ BMW Z4","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for Toyota GR Supra MK5 (A90\/A91) and BMW G29 Z4\u003c\/strong\u003e replaces the OEM plastic fuel lines with high-volume PTFE lines and adds a chassis-mounted high-flow filter. Essential for high-horsepower B58 port injection systems.\u003c\/p\u003e\n\n\u003ch3\u003eKit Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Flow PTFE Lines:\u003c\/strong\u003e Smooth fuel flow directly to secondary port injection rails or aftermarket HPFP setups.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChassis-Matched Underbody Mount:\u003c\/strong\u003e Secures the Radium filter assembly cleanly using existing factory mounting studs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% E85 Safe:\u003c\/strong\u003e No fuel odor permeation and full alcohol compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50518271525022,"sku":"20-0761-03","price":724.0,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50518271557790,"sku":"20-0761-05","price":695.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-plumbing-supra-mk5-20-0761.jpg?v=1790114538"},{"product_id":"radium-fuel-hanger-plumbing-kit-fr-s-brz-gt86-gr86","title":"Radium - Kit de plomberie pour support de pompe pour Scion FR-S \/ Subaru BRZ \/ GR86","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for Scion FR-S, Subaru BRZ, Toyota GT86, and GR86\u003c\/strong\u003e converts the factory returnless system into a high-performance return-style fuel system. Includes PTFE hoses, an underbody fuel filter with integrated check valve, a fuel pressure gauge, and the innovative tool-less Radium RA-Series adjustable fuel pressure regulator.\u003c\/p\u003e\n\n\u003ch3\u003eKit Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReturn-Style System Conversion:\u003c\/strong\u003e Enables rock-solid fuel pressure control across all RPMs and boost levels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRadium RA-Series Tool-Less FPR:\u003c\/strong\u003e Features a detented adjusting knob (1 psi per click) and 360-degree swiveling vacuum port with no jam nuts required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Check Valve Filter:\u003c\/strong\u003e Ensures quick starts and constant rail pressure holding after engine shut-off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnderbody Heat-Exchanger Mount:\u003c\/strong\u003e Keeps fuel cool while mounting cleanly to factory chassis points.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull PTFE Plumbing:\u003c\/strong\u003e Includes pre-crimped 8AN and 6AN PTFE lines and quick-connect fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter (Avec RA-Series FPR)","offer_id":50518271721630,"sku":"20-0966-03","price":985.0,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter (Avec RA-Series FPR)","offer_id":50518271754398,"sku":"20-0966-05","price":956.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-plumbing-brz-gr86-20-0966.jpg?v=1790114541"},{"product_id":"radium-fuel-hanger-surge-tank-nissan-r32-skyline-gt-r","title":"Radium - Fuel Hanger Surge Tank pour Nissan R32 Skyline GT-R","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Surge Tank (FHST) for the Nissan R32 Skyline GT-R (BNR32)\u003c\/strong\u003e solves the notorious fuel starvation issues of the R32 fuel tank. The FHST is an ingenious system that installs a complete, fully functional multi-pump fuel surge tank \u003cem\u003einside\u003c\/em\u003e the OEM fuel tank. It accommodates up to three high-pressure surge pumps plus an integrated lift pump to keep the surge canister continuously pressurized.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrue In-Tank Surge Tank:\u003c\/strong\u003e Eliminates external surge tank plumbing, noise, and cockpit fumes while providing 100% starvation protection down to empty.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTriple High-Pressure Pump Capacity:\u003c\/strong\u003e Supports 1, 2, or 3 surge pumps to feed extreme 1,000+ HP RB26DETT builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Fitment:\u003c\/strong\u003e Bolts directly into the R32 fuel tank opening with zero cutting, metal grinding, or chassis modification.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains OEM Level Sender:\u003c\/strong\u003e Engineered to accept the factory Nissan fuel level float arm to preserve accurate gauge cluster readings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Current Hermetic Bulkhead:\u003c\/strong\u003e Stainless steel electrical pass-throughs provide staged power delivery for multiple pumps safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings, hose ends, and fuel pumps are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Twin \/ Triple Walbro GSS342 \/ AEM 50-1200 (39mm)","offer_id":50518300786846,"sku":"20-0740-00","price":1145.0,"currency_code":"CAD","in_stock":true},{"title":"Twin \/ Triple Ti Automotive E5LM Brushless","offer_id":50518300819614,"sku":"20-0741-00","price":1188.0,"currency_code":"CAD","in_stock":true},{"title":"Twin \/ Triple Walbro F90000267\/274\/285\/295 (Hellcat)","offer_id":50518300852382,"sku":"20-0742-00","price":1188.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fhst-r32-standard-20-0740-00.jpg?v=1790117333"},{"product_id":"radium-fuel-hanger-surge-tank-chevrolet-corvette-c8","title":"Radium - Fuel Hanger Surge Tank pour Chevrolet Corvette C8 (2020+)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Surge Tank for the 2020+ Chevrolet Corvette C8\u003c\/strong\u003e is engineered to meet the extreme fuel demands of supercharged and twin-turbo mid-engine C8 builds. Replacing the stock fuel module inside the right-hand fuel tank, this billet system supports up to 3 high-performance fuel pumps for high-horsepower secondary port injection while acting as a true anti-starvation surge tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey Performance Features:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMultiple System Configurations:\u003c\/strong\u003e Configurable for direct injection support, auxiliary port injection, or as a true dedicated surge tank.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Pump Internal Capacity:\u003c\/strong\u003e Accommodates 1, 2, or 3 high-pressure EFI pumps (Walbro 39mm, E5LM Brushless, or Walbro E85 Hellcat pumps).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Syphon Support:\u003c\/strong\u003e Seamlessly retains the factory Corvette saddle tank crossover transfer mechanism to maintain equal fuel levels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Flow Merged Outlets:\u003c\/strong\u003e 10AN ORB feed port and 8AN ORB return port for maximum low-restriction flow capacity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Fuel Sender Retention:\u003c\/strong\u003e Reuses the stock C8 fuel level sensor float arm to preserve accurate dashboard fuel level readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Inlet and outlet ports are female ORB; male AN adapter fittings, hose ends, and fuel pumps are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 (39mm)","offer_id":50518301016222,"sku":"20-1110","price":1217.0,"currency_code":"CAD","in_stock":true},{"title":"Ti Automotive E5LM Brushless","offer_id":50518301048990,"sku":"20-1111","price":1217.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285\/295 (Hellcat)","offer_id":50518301081758,"sku":"20-1112","price":1217.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-hanger-c8-standard-20-1110.jpg?v=1790117340"},{"product_id":"radium-fuel-hanger-plumbing-kit-for-bmw-e46-3-series-m3","title":"Radium - Kit de plomberie pour support de pompe pour BMW E46 (3-Series \u0026 M3)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for BMW E46 (3-Series \u0026amp; M3)\u003c\/strong\u003e provides pre-fabricated PTFE fuel lines and an underbody high-flow fuel filter kit Conçu spécifiquement pour the BMW E46 chassis. Designed to mate seamlessly with the Radium Fuel Pump Hanger (20-1180), this plumbing kit converts the restrictive factory fuel lines into a high-capacity -8AN feed and -6AN return motorsport fuel delivery system.\u003c\/p\u003e\n\n\u003ch3\u003eChassis Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1999–2006 BMW E46 3-Series (323i, 325i, 328i, 330i Coupe \/ Sedan)\u003c\/li\u003e\n  \u003cli\u003e2001–2006 BMW E46 M3 (S54 3.2L Coupe)\u003c\/li\u003e\n  \u003cli\u003e\u003cem\u003eNote: Not Compatible avec E46 Convertible chassis due to underbody floor stamping differences.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFilter Element Options:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-1175-03 (Stainless Steel 10-Micron):\u003c\/strong\u003e Ideal for all fuels including high-ethanol E85, ethanol blends, and race gas. Pleated stainless steel element is cleanable and reusable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-1175-05 (Microglass 6-Micron):\u003c\/strong\u003e Ultra-high efficiency microglass element providing maximum particle filtration for standard pump gasoline. (Disposable; not recommended for high ethanol blends).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCaractéristiques principales :\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-Crimped PTFE Lines:\u003c\/strong\u003e Smooth-bore conductive PTFE inner core wrapped in stainless steel braid and black CPE jacket. Prevents fuel vapor odor bleed-through and withstands extreme fuel pressures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBillet Filter Mounting:\u003c\/strong\u003e Includes a dedicated billet aluminum clamp bracket securing the high-flow Radium fuel filter in the OEM underbody filter location.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop-In Integration:\u003c\/strong\u003e Directly connects the Radium E46 Fuel Pump Hanger to the front engine bay fuel rail and regulator connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eNotice: Mating connections use female ORB and male AN threads. Assemble all fittings with fuel-safe O-ring lubricant.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50519154950302,"sku":"20-1175-03","price":796.95,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50519154983070,"sku":"20-1175-05","price":767.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-bmw-e46-fuel-hanger-plumbing-kit-20-1175.jpg?v=1790138541"},{"product_id":"radium-fuel-hanger-feed-kit-for-mitsubishi-evo-x","title":"Radium - Kit d'alimentation pour support de pompe pour Mitsubishi EVO X","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Feed Kit for Mitsubishi EVO X (CZ4A)\u003c\/strong\u003e replaces the restrictive factory underbody fuel feed line with a high-capacity -8AN PTFE braided fuel line running from the fuel pump hanger to the engine bay. Engineered to work seamlessly with the Radium EVO X Fuel Pump Hanger (20-164X), this kit includes a high-flow Radium in-line fuel filter with chassis mounting bracket.\u003c\/p\u003e\n\n\u003ch3\u003eChassis Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2008–2015 Mitsubishi Lancer Evolution X (CZ4A - 4B11T)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFilter Element Options:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0946-03 (Stainless Steel 10-Micron):\u003c\/strong\u003e Compatible avec tous les fuel types including pump gas, race gas, and high-ethanol E85 blends. Cleanable and reusable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0946-05 (Microglass 6-Micron):\u003c\/strong\u003e Maximum particulate filtration efficiency for pump gasoline and race fuels (disposable element).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50519186538654,"sku":"20-0946-03","price":579.95,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50519186571422,"sku":"20-0946-05","price":550.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-evo-x-fuel-hanger-feed-kit-20-0946.jpg?v=1790139535"},{"product_id":"radium-fuel-hanger-plumbing-kit-for-mitsubishi-evo-7-9-ct9a","title":"Radium - Kit de plomberie pour support de pompe pour Mitsubishi EVO 7-9 (CT9A)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for Mitsubishi EVO 7, 8, and 9 (CT9A)\u003c\/strong\u003e provides a complete high-flow fuel line replacement connecting the Radium Fuel Pump Hanger (20-134X) to the engine bay. Features pre-crimped -8AN feed and -6AN return PTFE lines and an underbody high-flow fuel filter kit Conçu spécifiquement pour the CT9A chassis.\u003c\/p\u003e\n\n\u003ch3\u003eChassis Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2006 Mitsubishi Lancer Evolution 7, 8, and 9 (CT9A - 4G63)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFilter Element Options:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0376-03 (Stainless Steel 10-Micron):\u003c\/strong\u003e Cleanable\/reusable stainless filter element, fully Compatible avec E85 ethanol and pump fuel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0376-05 (Microglass 6-Micron):\u003c\/strong\u003e Ultra-fine 6-micron filtration for maximum injector protection on gasoline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50519186604190,"sku":"20-0376-03","price":695.95,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50519186636958,"sku":"20-0376-05","price":666.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-evo-7-8-9-fuel-hanger-plumbing-kit-20-0376.jpg?v=1790139539"},{"product_id":"radium-fuel-hanger-plumbing-kit-for-nissan-r32-skyline-gt-r","title":"Radium - Kit de plomberie pour support de pompe pour Nissan R32 Skyline GT-R","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for Nissan R32 Skyline GT-R (BNR32)\u003c\/strong\u003e converts the restrictive factory steel fuel lines into a motorsport -8AN feed and -6AN return system. Designed to integrate directly with the Radium R32 Fuel Hanger Surge Tank (20-074X) and front-mount fuel rails, routing pre-crimped PTFE lines along the chassis floorpan with a high-flow in-line filter.\u003c\/p\u003e\n\n\u003ch3\u003eChassis Compatibility:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1989–1994 Nissan Skyline GT-R (BNR32 - RB26DETT AWD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFilter Element Options:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0703-03 (Stainless Steel 10-Micron):\u003c\/strong\u003e 100% Compatible avec E85, race gas, and gasoline. Washable\/reusable stainless mesh.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-0703-05 (Microglass 6-Micron):\u003c\/strong\u003e Highest efficiency disposable element for pump fuel applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Acier inoxydable 10-Micron Filter","offer_id":50519186669726,"sku":"20-0703-03","price":796.95,"currency_code":"CAD","in_stock":true},{"title":"Microglass 6-Micron Filter","offer_id":50519186702494,"sku":"20-0703-05","price":767.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-r32-skyline-gtr-fuel-hanger-plumbing-kit-20-0703.jpg?v=1790139543"},{"product_id":"radium-fuel-hanger-plumbing-kit-for-ford-mustang-gt-5-0l-s550-s650","title":"Radium - Kit de plomberie pour support de pompe pour Ford Mustang GT 5.0L (S550 \/ S650)","description":"\u003cp\u003eThe \u003cstrong\u003eRadium Engineering Fuel Hanger Plumbing Kit for Ford Mustang GT (S550 \u0026amp; S650)\u003c\/strong\u003e replaces restrictive factory fuel lines with high-capacity -10AN feed and -8AN return pre-crimped PTFE lines. Conçu spécifiquement pour high-horsepower supercharged, turbocharged, and naturally aspirated 5.0L Coyote and Voodoo V8 platforms to support extreme fuel volume demands.\u003c\/p\u003e\n\n\u003ch3\u003eChassis \u0026amp; Year Configurations:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2015–2017 Mustang GT (S550 Gen 2 Coyote):\u003c\/strong\u003e Chassis-specific line routing and underbody filter bracket geometry.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2018+ Mustang GT (S550 \/ S650 Gen 3 \u0026amp; Gen 4 Coyote):\u003c\/strong\u003e Configured for dual-injection DI\/PFI floorpan clearances and regulator connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFilter Element Selection:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless Steel 10-Micron:\u003c\/strong\u003e Reusable, cleanable element engineered for high ethanol (E85) and motorsport fuels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicroglass 6-Micron:\u003c\/strong\u003e High particle capture disposable element for pump gasoline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"2015–2017 Mustang GT (Acier inoxydable 10-Micron)","offer_id":50519186735262,"sku":"20-1816-03","price":1420.0,"currency_code":"CAD","in_stock":true},{"title":"2015–2017 Mustang GT (Microglass 6-Micron)","offer_id":50519186768030,"sku":"20-1816-05","price":1391.0,"currency_code":"CAD","in_stock":true},{"title":"2018+ Mustang GT (Acier inoxydable 10-Micron)","offer_id":50519186800798,"sku":"20-1817-03","price":1594.0,"currency_code":"CAD","in_stock":true},{"title":"2018+ Mustang GT (Microglass 6-Micron)","offer_id":50519186833566,"sku":"20-1817-05","price":1565.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-ford-mustang-gt-fuel-hanger-plumbing-kit.jpg?v=1790139547"},{"product_id":"radium-fuel-pump-hanger-2022-fl5-honda-civic-type-r","title":"Radium - Support de pompe à essence, 2022+ FL5 Honda Civic Type-R","description":"\u003cp\u003eThis Radium Engineering fuel hanger is Compatible avec 1 or 2 or 3 aftermarket fuel pumps. The kit reuses the OEM fuel level sensor.\u003c\/p\u003e\n\u003cp\u003eThere will be enough components included to use 1, 2, or 3 fuel pumps. Depending on the setup, some parts will simply not be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe merged fuel pump outlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate. However, a low profile 8AN male fitting is provided to connect to an aftermarket fuel line (not included). The fuel return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. A low profile SAE quick connect fitting is provided to connect to the factory feed line which can be repurposed as a return line. All fittings are machined low enough to clear the surrounding area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL STARVATION PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. This ensures the pump(s) have adequate fuel available, even during aggressive driving. The integrated fuel tank collector is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 1-piece anodized aluminum collector box keeps fuel trapped around the pump inlet(s).\u003c\/li\u003e\n\u003cli\u003eThere are three 1-way fill valves incorporated in the bottom of the collector box that allows fuel in, but not out. Each 1-way fill valve flows 355 LPH.\u003c\/li\u003e\n\u003cli\u003eThe collector box is constantly replenished with fuel returning from the pressure regulator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. They have an anti-rotation feature that prevents the terminals from spinning. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFUEL HANGER PLUMBING KIT\u003c\/h3\u003e\n\u003cp\u003eThese kits provide all necessary plumbing to and from the engine including a fuel filter, fuel pressure regulator, fuel lines, adapter fittings, and mounting hardware. First, a 8AN PTFE fuel line is installed to the fuel hanger pump outlet.\u003c\/p\u003e\n\u003cp\u003eThe 8AN PTFE fuel hose runs behind the fuel tank. A high flow fuel filter is mounted to the LH side of the fuel tank using a 2-piece billet mount. Elements are either 10 micron stainless (-03) or 6 micron microglass (-05). Go \u003ca href=\"\/fr\/products\/radium-fuel-filter-elements\"\u003eHERE\u003c\/a\u003e for more filter element information. From the fuel filter outlet, another 8AN PTFE fuel line runs towards the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003eTo accept the new large feed line, new billet aluminum fuel\/brake line retainers replace the factory plastic retainers.\u003c\/p\u003e\n\u003cp\u003eA dual fuel pressure regulator (DFPR) is mounted on the firewall using OEM threaded holes. With the DFPR regulator, there are 2 independent fuel pressure outputs. For the OEM direction injection system, the black knob and a 0-100psi gauge is used to calibrate the LPFP fuel pressure. If an aftermarket port injection system is ever installed, there is a separate independent outlet port. A port injection system, an 8AN ORB DFPR adapter fitting, and a fuel line is all that would be required. These plumbing kits come with a 8AN ORB plug for this port. NOTE: Port injection fuel pressure is calibrated using the green knob.\u003c\/p\u003e\n\u003cp\u003eIn the engine bay, 6AN (3\/8\") EFI fuel hose and SAE quick connect adapters are provided to convert the OEM fuel feed line into a fuel return line.\u003cbr\u003e\u003cbr\u003eAt the rear, 6AN PTFE fuel line and an SAE quick connect are provided to adapt the OEM fuel line to the new return port.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"AEM 50-1220 \/ DW440 \/ None (Hanger seul)","offer_id":67438794834078,"sku":"20-1090","price":725.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ Avec Filtre inox Kit de plomberie","offer_id":67438794866846,"sku":"20-1090 + 20-1095-03","price":1754.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ Avec Filtre microfibre de verre Kit de plomberie","offer_id":67438794899614,"sku":"20-1090 + 20-1095-05","price":1725.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ None (Hanger seul)","offer_id":67438794932382,"sku":"20-1092","price":783.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Avec Filtre inox Kit de plomberie","offer_id":67438794965150,"sku":"20-1092 + 20-1095-03","price":1812.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Avec Filtre microfibre de verre Kit de plomberie","offer_id":67438794997918,"sku":"20-1092 + 20-1095-05","price":1783.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-2022-fl5-honda-civic-type-r-1.jpg?v=1790632503"},{"product_id":"radium-fuel-pump-hanger-evo-1-6","title":"Radium - Support de pompe à essence, Mitsubishi EVO 1-6","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1330 Fuel Pump Hanger, Mitsubishi EVO 1-6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/6x4_website_20-1330.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering single pump hanger is Compatible avec a variety of aftermarket fuel pumps ranging from 340LPH to 810LPH. Both (2-wire) brushed and (3 or 4-wire) brushless pumps can be used.\u003cbr\u003e\u003cbr\u003eThe kit is Compatible avec the OEM gauge cluster readings as both the OEM fuel level sensor and the OEM low fuel indicator are reused.\u003cbr\u003e\u003cbr\u003eA new high flow PRV venturi jet pump is provided. This has a built-in pressure relief valve that bypasses high fuel pressure in the return line. This feature keeps fuel rail pressure stabilized.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: After installing this fuel hanger, the fuel tank will no longer need to be removed for servicing the pump or sensors. All of these components will now be reached through the OEM access covers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. A low profile 8AN male fitting is provided.\u003c\/p\u003e\n\u003cp\u003eThe fuel return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. A low profile 6AN male adapter is provided.\u003c\/p\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the surrounding area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL STARVATION PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM fuel tank has a built-in collector bowl. It has a labyrinth that prevents fuel from escaping during aggressive driving. The collector bowl is constantly replenished with fuel from both the pressure regulator and the crossover hose.\u003c\/p\u003e\n\u003cp\u003eThe crossover hose pulls from from the passive side of the saddle tank and is driven by the PRV venturi jet pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. They have an anti-rotation feature that prevents the terminals from spinning. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1331 Fuel Hanger Connection Kit, Mitsubishi EVO 1-5\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/6x4_website_20-1331.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis kit provides all necessary connections from the top of the fuel tank to the OEM hard lines at the rear of the vehicle. NOTE: Custom hoses and fittings will need to be purchased and constructed separately to run larger lines all the way to the engine and back.\u003c\/p\u003e\n\u003cp\u003eFrom the pump outlet, a short 8AN PTFE fuel line runs just behind the pump hanger and down underneath the fuel tank. Right there are 2 different types of fitting connections at the OEM hard line. As shown below, early models use an inverted flare fitting.\u003c\/p\u003e\n\u003cp\u003eLater models use an SAE quick connect, as shown below. Both adapters for these connections are included in this kit.\u003c\/p\u003e\n\u003cp\u003eWhen returning fuel comes back from the OEM FPR, it travels through an OEM barbed hard line that terminates just underneath the fuel tank. A short rubber hose is provided that adapts to 6AN. From here, a 6AN PTFE hose routes to the return port on the pump hanger.\u003c\/p\u003e\n\u003cp\u003eFour aluminum spacers, new mounting screws, and thicker adhesive foam are provided to permit the (RH) OEM fuel tank access cover to clear the larger fuel lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1332 Fuel Hanger Connection Kit, Mitsubishi EVO 6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/6x4_website_20-1332.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis kit provides all necessary connections from the top of the fuel tank to the OEM hard lines at the rear of the vehicle. \u003cbr\u003eNOTE: Custom hoses and fittings will need to be purchased and constructed separately to run larger lines all the way to the engine and back.\u003c\/p\u003e\n\u003cp\u003eFrom the pump outlet, a long 8AN PTFE fuel line runs down underneath the RH side of the fuel tank. An SAE quick connect adapter is provided that connects to the OEM hard line, as shown below.\u003c\/p\u003e\n\u003cp\u003eWhen returning fuel comes back from the OEM FPR, it travels through an OEM barbed hard line that terminates just underneath the fuel tank. A short rubber hose is provided that adapts to 6AN. From here, a 6AN PTFE hose routes across the tank to the return port on the pump hanger. \u003cbr\u003eTwo anodized aluminum clamps are provided to mount the PTFE fuel lines across the upper front portion of the fuel tank, as shown above.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1334-03 \u0026amp; 20-1334-05 Fuel Hanger Plumbing Kits, Mitsubishi EVO 1-6\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1334_1200px_wide.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eWhen used in conjunction with one of the fuel hanger connection kits (mentioned above), the fuel hanger plumbing kits provide all necessary connections for the fuel system. This only excludes the fuel rail and fuel injectors. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA long 8AN PTFE fuel line adapts at the rear of the vehicle to the 8AN PTFE fuel line in the fuel hanger connection kit. This new 8AN PTFE fuel line runs all the way up engine bay and mates to a Radium fuel filter mounted in the OEM location. The provided short 8AN PTFE fuel line routes from the fuel filter to the inlet of an aftermarket fuel rail (not included). A fuel pressure gauge and a Radium DMR mount to the fuel rail outlet. From here, a 6AN EFI hose route all the way back to the 6AN PTFE fuel line from the fuel hanger connection kit. All lines are secured using the included biller fuel brake line retainers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Hanger seul (20-1330)","offer_id":67620330930334,"sku":"20-1330","price":725.0,"currency_code":"CAD","in_stock":true},{"title":"Hanger + OEM Line Connection Kit - EVO 1-5 (20-1331)","offer_id":67620330963102,"sku":"20-1330 + 20-1331","price":1015.0,"currency_code":"CAD","in_stock":true},{"title":"Hanger + OEM Line Connection Kit - EVO 6 (20-1332)","offer_id":67620330995870,"sku":"20-1330 + 20-1332","price":1015.0,"currency_code":"CAD","in_stock":true},{"title":"Hanger + Full Kit de plomberie - Filtre inox (20-1334-03)","offer_id":67620331028638,"sku":"20-1330 + 20-1334-03","price":1769.0,"currency_code":"CAD","in_stock":true},{"title":"Hanger + Full Kit de plomberie - Filtre microfibre de verre (20-1334-05)","offer_id":67620331061406,"sku":"20-1330 + 20-1334-05","price":1740.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-evo-1-6-1.jpg?v=1790632737"},{"product_id":"radium-fuel-pump-hanger-2016-honda-civic","title":"Radium - Support de pompe à essence, 2016+ Honda Civic","description":"\u003cp\u003eThis Radium Engineering fuel hanger for the 2016+ Honda Civic is Compatible avec 1 or 2 or 3 aftermarket fuel pumps. The kit reuses the OEM fuel level sensor as well as the OEM vent and ORVR emission ports.\u003c\/p\u003e\n\u003cp\u003eFor some models, available plumbing kits provide all necessary plumbing to and from the engine including a fuel filter, fuel pressure regulator, fuel lines, adapter fittings, and mounting hardware.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1080 Fuel Hanger, 2016+ Honda Civic, Excluding FL5, AEM 50-1220, DW440\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/TITLEPICwebsite20-1080new.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel hanger is Compatible avec 1 or 2 or 3 aftermarket fuel pumps. The kit reuses the OEM fuel level sensor as well as the OEM vent and ORVR emission ports.\u003c\/p\u003e\n\u003cp\u003eThere will be enough components included to use 1, 2, or 3 fuel pumps. Depending on the setup, some parts will simply not be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe merged fuel pump outlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate. However, a low profile 8AN male fitting is provided to connect to an aftermarket fuel line (not included). The fuel return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. A 6AN male adapter is provided to connect to an aftermarket fuel line (not included). All fittings are machined low enough to clear the surrounding area.\u003c\/p\u003e\n\u003cp\u003eAs shown, some vehicles (outside of the North America) do not have vent or ORVR ports. Note how the 2 ports on the OEM unit are sealed shut. For these applications, a 10AN ORB plug (shown red) and a 6AN ORB plug are included to seal these ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL STARVATION PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. This ensures the pump(s) have adequate fuel available, even during aggressive driving. The integrated fuel tank collector is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 1-piece anodized aluminum collector box keeps fuel trapped around the pump inlet(s).\u003c\/li\u003e\n\u003cli\u003eThere are three 1-way fill valves incorporated in the bottom of the collector box that allows fuel in, but not out. Each 1-way fill valve flows 355 LPH.\u003c\/li\u003e\n\u003cli\u003eThe collector box is constantly replenished with fuel returning from the pressure regulator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. They have an anti-rotation feature that prevents the terminals from spinning. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1082 Fuel Hanger, 2016+ Honda Civic, Excluding FL5, Walbro F90000267\/274\/285\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/6x4_website_20-1082NEW.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel hanger is Compatible avec 1 or 2 or 3 aftermarket fuel pumps. The kit reuses the OEM fuel level sensor as well as the OEM vent and ORVR emission ports.\u003c\/p\u003e\n\u003cp\u003eThere will be enough components included to use 1, 2, or 3 fuel pumps. Depending on the setup, some parts will simply not be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe merged fuel pump outlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate. However, a low profile 8AN male fitting (shown below left) is provided to connect to an aftermarket fuel line (not included). The fuel return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. A 6AN male adapter is provided to connect to an aftermarket fuel line (not included). All fittings are machined low enough to clear the surrounding area.\u003c\/p\u003e\n\u003cp\u003eAs shown, some vehicles (outside of the North America) do not have vent or ORVR ports. Note how the 2 ports on the OEM unit are sealed shut. For these applications, a 10AN ORB plug (shown red) and a 6AN ORB plug are included to seal these ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL STARVATION PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. This ensures the pump(s) have adequate fuel available, even during aggressive driving. The integrated fuel tank collector is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 1-piece anodized aluminum collector box keeps fuel trapped around the pump inlet(s).\u003c\/li\u003e\n\u003cli\u003eThere are three 1-way fill valves incorporated in the bottom of the collector box that allows fuel in, but not out. Each 1-way fill valve flows 355 LPH.\u003c\/li\u003e\n\u003cli\u003eThe collector box is constantly replenished with fuel returning from the pressure regulator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. They have an anti-rotation feature that prevents the terminals from spinning. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1085-03 \u0026amp; 20-1085-05 Fuel Hanger Plumbing Kit, 17-21 Honda Civic Type-R\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/6x4_website_20-1085-0X.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese kits provide all necessary plumbing to and from the engine including a fuel filter, fuel pressure regulator, fuel lines, adapter fittings, and mounting hardware. First, a 8AN PTFE fuel line is installed to the fuel hanger pump outlet, as shown below.\u003c\/p\u003e\n\u003cp\u003eThe 8AN PTFE fuel hose runs behind the fuel tank. A high flow fuel filter is mounted to the LH side of the fuel tank using a 2-piece billet mount. Elements are either 10 micron stainless (-03) or 6 micron microglass (-05). Go \u003ca href=\"\/fr\/products\/radium-fuel-filter-elements\"\u003eHERE\u003c\/a\u003e for more filter element information. From the fuel filter outlet, another 8AN PTFE fuel line runs towards the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003eTo accept the new large feed line, new billet aluminum fuel\/brake line retainers replace the factory plastic retainers.\u003c\/p\u003e\n\u003cp\u003eA dual fuel pressure regulator (DFPR) is mounted on the firewall using OEM threaded holes. With the DFPR regulator, there are 2 independent fuel pressure outputs. For the OEM direction injection system, the black knob and a 0-100psi gauge is used to calibrate the LPFP fuel pressure. If an aftermarket port injection system is ever installed, there is a separate independent outlet port. A port injection system, an 8AN ORB DFPR adapter fitting, and a fuel line is all that would be required. These plumbing kits come with a 8AN ORB plug for this port. NOTE: Port injection fuel pressure is calibrated using the green knob.\u003c\/p\u003e\n\u003cp\u003eIn the engine bay, 6AN (3\/8\") EFI fuel hose and SAE quick connect adapters are provided to convert the OEM fuel feed line into a fuel return line.\u003cbr\u003e\u003cbr\u003eAt the rear, 6AN PTFE fuel line and an SAE quick connect are provided to adapt the OEM fuel line to the new return port.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"AEM 50-1220 \/ DW440 \/ None (Hanger seul)","offer_id":67438795063454,"sku":"20-1080","price":725.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ Avec Filtre inox Kit de plomberie","offer_id":67438795096222,"sku":"20-1080 + 20-1085-03","price":1754.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ Avec Filtre microfibre de verre Kit de plomberie","offer_id":67438795128990,"sku":"20-1080 + 20-1085-05","price":1725.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ None (Hanger seul)","offer_id":67438795161758,"sku":"20-1082","price":783.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Avec Filtre inox Kit de plomberie","offer_id":67438795194526,"sku":"20-1082 + 20-1085-03","price":1812.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Avec Filtre microfibre de verre Kit de plomberie","offer_id":67438795227294,"sku":"20-1082 + 20-1085-05","price":1783.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-2016-honda-civic-1.jpg?v=1790632744"},{"product_id":"radium-fuel-pump-access-covers-10-15-chevrolet-camaro","title":"Radium - Fuel Pump Access Cover, 10-15 Chevrolet Camaro","description":"\u003cp\u003eThis fuel pump access cover permits the fuel pump to be serviced without dropping the gas tank. It simply seals the cabin and protects the fuel pump module. The lightweight transparent cover was designed to conform to the sheet metal allowing the rear bench seat to be reused.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Access Cover 10-15 Chevrolet Camaro","offer_id":67438692466846,"sku":"20-1323","price":130.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-access-covers-10-15-chevrolet-camaro-1.jpg?v=1790632759"},{"product_id":"radium-fuel-pump-access-cover-08-21-subaru","title":"Radium - Fuel Pump Access Cover, 08-21 Subaru","description":"\u003cp\u003eThese fuel pump access covers are a direct replacement for the factory steel plates. They simply shield and protect the fuel pump module.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Access Cover 08-14 Subaru","offer_id":67438692499614,"sku":"20-0745","price":116.0,"currency_code":"CAD","in_stock":true},{"title":"Fuel Pump Access Cover 15-21 Subaru","offer_id":67438692532382,"sku":"20-0746","price":116.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-access-cover-08-21-subaru-1.jpg?v=1790632764"},{"product_id":"radium-fuel-pump-access-cover-mazda-fd-rx-7","title":"Radium - Fuel Pump Access Cover, Mazda FD RX-7","description":"\u003cp\u003eThese fuel pump access covers are a direct replacement for the factory steel plates. They simply shield and protect the fuel pump module.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Access Cover Mazda FD RX7","offer_id":67438692565150,"sku":"20-0736","price":116.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-access-cover-mazda-fd-rx-7-1.jpg?v=1790632769"},{"product_id":"radium-fuel-pump-access-cover-nissan-s13-r32","title":"Radium - Fuel Pump Access Cover, Nissan S13, R32","description":"\u003cp\u003eThese fuel pump access covers are a direct replacement for the factory steel plates. They simply shield and protect the fuel pump module.\u003c\/p\u003e\n\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Access Cover Nissan S13 R32","offer_id":67438692597918,"sku":"20-0735","price":116.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-access-cover-nissan-s13-r32-1.jpg?v=1790632773"},{"product_id":"radium-fuel-level-sender-adapter-denso","title":"Radium - Fuel Level Sender Adapter, Denso","description":"\u003cp\u003eThis kit is designed for adapting a specific Denso fuel level sender (not included) to a flat surface.\u003c\/p\u003e\n\u003cp\u003eWill work in other vehicles. Reference the physical fuel level sender first to verify. Scion FR-S sensor shown below.\u003c\/p\u003e\n\u003cp\u003eTo install, simply place the Denso fuel level sender onto the adapter and slide downwards until the tab locks into place. There are multiple integrated holes permitting different float heights. Included are two M5x0.8x12mm stainless steel bolts. Mitsubishi EVO X shown below.\u003c\/p\u003e\n\u003cp\u003eThe adapter is made from 6061 aluminum and anodized black. There is also a provision to secure an OEM fuel temperature sensor (shown below).\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Level Sender Adapter Denso","offer_id":67438693908638,"sku":"20-0350","price":29.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-level-sender-adapter-denso-1.jpg?v=1790632866"},{"product_id":"radium-fuel-pump-install-kit-porsche-996-turbo","title":"Radium - Fuel Pump Install Kit, Porsche 996 Turbo","description":"\u003cp\u003eFor those looking to increase the power output of their Porsche 911 Turbo (996), this plug and play (bolt-in) fuel pump replacement solution uses the most popular high performance fuel pumps on the market. The basic kit features a 6061-T6 CNC billet aluminum sleeve that slides over the corresponding 39mm aftermarket pump to mimic the larger 50mm diameter of the Porsche fuel pump. The machined rib snaps into the fuel pump hanger and properly locates the filter sock.\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNOTES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf your pump does not include a filter sock, you can find compatible fuel pump filter socks \u003ca href=\"\/fr\/products\/radium-fuel-pump-inlet-filter-socks\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Walbro F90000262\/273 fuel pump uses the same connectors as the OEM Porsche pump\u003c\/li\u003e\n\u003cli\u003eAll pumps listed above outflow the Porsche pump, excluding Walbro 255LPH. However, if the OEM check valve (noted in instructions) is removed, it will outflow the OEM Porsche pump\u003c\/li\u003e\n\u003cli\u003eTo fix any fuel starvation issues that are inherent with the OEM fuel tank system, we recommend using this product along with the \u003ca href=\"products\/fuel-surge-tank-install-kit-porsche-996-turbo\"\u003eRadium Fuel Surge Tank Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications to the fuel system are required for installation of this product\u003c\/li\u003e\n\u003cli\u003eThe OEM Porsche venturi jet pump system and level sender is all retained\u003c\/li\u003e\n\u003cli\u003eThe blue male spade terminals will adapt to the internal OEM fuel pump wiring harness. A flying lead will need to be purchased for the pump used. Depending on the brand, these are sometimes included with the purchase of the pump. Alternatively, purchase one of the plug and play connector harnesses below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Kit 996 Turbo No Pump Included \/ Fuel Pump Connector Harness Porsche Walbro 255","offer_id":67438700363934,"sku":"20-0276-00-17-0053","price":116.0,"currency_code":"CAD","in_stock":true},{"title":"Fuel Pump Kit 996 Turbo No Pump Included \/ Fuel Pump Connector Harness Porsche Walbro E85","offer_id":67438700396702,"sku":"20-0276-00-17-0054","price":116.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-install-kit-porsche-996-turbo-1.jpg?v=1790633020"},{"product_id":"radium-fuel-pump-hanger-and-fhst-late-nissan","title":"Radium - Support de pompe à essence and FHST, Late Nissan","description":"\u003cp\u003eThe Radium Engineering fuel pump hanger replaces the entire factory fuel pump assembly inside the Nissan fuel tank. It can be configured with 1 or 2 aftermarket fuel pumps to meet the fuel demands of various high performance engines. Fuel pump options include Walbro (Ti Automotive) or AEM. The pump(s) are suspended down in the bottom of the tank, similar to the stock fuel hanger. From there, they feed through polyamide nylon tubing to the top hat. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory Nissan fuel level sender, low fuel switch, and fuel temperature (OBD-II only) are reused so full functionality is retained. A venturi jet pump is integrated into the top plate and provides means to draw fuel from the opposite side of the fuel tank.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0630-00 \u0026amp; 20-0632-00 Fuel Pump Hanger\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0630-00.jpg\" alt=\"20-0630-00\"\u003e \u003cbr\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0632-00.jpg\" alt=\"20-0632-00\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe pre-installed adapter fittings permit direct connections for all factory fuel line variations (SAE quick connect and hose barb). No extra fuel plumbing is required if using stock fuel lines.\u003c\/p\u003e\n  \u003cul\u003e\n\u003cli\u003eThe threads on the feed port are 10AN ORB (7\/8\"-14) female\u003c\/li\u003e\n\u003cli\u003eThe threads on the return port are 8AN ORB (3\/4\"-16) female\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf using aftermarket AN style hoses, low profile AN swivel adapter fittings will be required and are sold separately. Straight adapter fittings may also be used, but clearance with the access cover plate will not be possible. When installing aftermarket hoses, the crossover port and hose (center) does not need to be changed.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/fr\/collections\/radium-adapters-fittings\" rel=\"noopener\" target=\"_blank\"\u003eSHOP LOW PROFILE SWIVEL FITTINGS HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM system uses a venturi jet pump to transfer fuel from the passive side of the tank to the active (pump) side of the tank. When using aftermarket high-flow pumps this venturi jet pump creates a restriction in the fuel return, resulting in unwanted backpressure and unmanageable fuel pressure. Radium Engineering has redesigned the siphon system to completely eliminate this restriction but still effectively scavenge fuel the same as factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Enough studs are built in the top hat to accommodate brushless fuel pumps as well as the FHST add-on, described below.\u003c\/p\u003e\n\u003cp\u003eElectrical hardware is included for the fuel pump(s) and sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle fuel pump installations can re-use the OEM fuel pump controller wiring\u003c\/li\u003e\n\u003cli\u003eIt is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential\u003c\/li\u003e\n\u003cli\u003eUniversal fuel pump wiring kits can be found \u003ca href=\"\/fr\/products\/radium-diy-fuel-pump-wiring-kit\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. Select one for each aftermarket pump\u003c\/li\u003e\n\u003cli\u003eDepending on fuel pressure, the venturi jet pump will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps\u003c\/li\u003e\n\u003cli\u003eIf it is important for fuel pressure to hold steady after the engine is shut down, install one of these \u003ca href=\"\/fr\/products\/radium-check-valve-fuel-filter-conversion-kit\"\u003eCHECK VALVES\u003c\/a\u003e somewhere in the fuel system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0700 \u0026amp; 20-0701 FHST Add-On\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0700.jpg\" alt=\"20-0700\"\u003e \u003cbr\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0701.jpg\" alt=\"20-0701\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis is an optional add-on for the fuel pump hanger. The corresponding fuel pupm hanger based on the fuel pumps being used is required to install this add-on. It is recommended to use a single pump hanger to feed the surge tank. The surge tank can then be equipped with one or two fuel pumps to feed the engine.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering FHST (fuel hanger surge tank) add-on is the ultimate solution for fuel starvation issues. Due to the saddle-bag style OEM fuel tank and insufficient baffling in late model Nissans, fuel slosh is common when driven aggressively. Unstable pressure resulting in a lean fuel mixture can cause engine damage. A stand-alone surge tank is an excellent device for eliminating fuel starvation issues, but installation can be complex. This add-on is a fully functional fuel surge tank mounted inside the OEM tank.\u003c\/p\u003e\n\u003cp\u003eSimple plug and play connections are all that is required to attach the 2 systems together. The FHST add-on utilizes most of the Radium fuel hanger parts. The surge tank can hold 1 or 2 aftermarket pumps including brushless variations. With the addition of the fuel pump in the OEM location, there could be 2-3 pumps inside the gas tank (total). Even with all of the extra fuel pumps, the FHST system is very straight forward and relatively simple to install.\u003c\/p\u003e\n\u003cp\u003eNo grinding, bending, or modification of the vehicle is required. The system is Compatible avec tous les alternative fuels such as E85.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat keeps the surge tank full?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe surge tank fuel pump(s) are supplied with fuel from 4 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe high flow (low pressure) fuel pump located in the OEM location\u003c\/li\u003e\n\u003cli\u003eThe fuel returning from the fuel pressure regulator (FPR)\u003c\/li\u003e\n\u003cli\u003eThe fuel transfer from the integrated venturi jet pump siphon\u003c\/li\u003e\n\u003cli\u003eThe 355LPH one-way fill valve on the bottom of the surge tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExternal high current fuel pump wiring is provided for installing one FHST pump (1 relay, 1 fuse, and all associated wiring and hardware). To wire in a second FHST pump, a second fuse and relay are required. Consider purchasing Radium 17-0031 DIY Wiring Kit \u003ca href=\"\/fr\/products\/radium-diy-fuel-pump-wiring-kit\"\u003eHERE\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: Because the fuel pump supplying the FHST (in the original pump location) will now operate at very low pressure (high flow), the OEM external fuel pump wiring will be sufficient for this \"lift\" pump.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0702-03 \u0026amp; 20-0702-05 Fuel Hanger Plumbing Kits\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg id=\"myImg\" class=\"myImages\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0702-0X.jpg\" alt=\"20-0702-0X\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis plumbing kits include everything required to plumb the fuel system between the Radium pump hanger and the fuel rail. This kit is NOT designed for the stock fuel rail.\u003c\/p\u003e\n\u003cp\u003eThe kit includes 8AN (1\/2\") feed hose that runs from the fuel pump hanger through the provided fuel filter. A 8AN 90 degree PushLok hose end is included for connecting to an 8AN male aftermarket fuel rail fitting (not included). A 6AN (3\/8\") fuel hose runs from the FPR (not included) to the fuel pump hanger return port. A 6AN 90 degree PushLok hose end is included for connecting to an 6AN male aftermarket FPR fitting (not included). The fuel lines run though billet aluminum fuel brake line retainers. The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank. The feed and\/or return hose can be easily modified for installation of an in-line flex fuel sensor.\u003c\/p\u003e\n\u003cp\u003eThe included Radium Engineering fuel filter mounts in the stock filter location using a specifically designed Nissan bolt-on billet mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Standard Fuel Hanger seul","offer_id":67438795882654,"sku":"20-0630-00","price":768.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Hanger + FHST Surge Tank Add-On","offer_id":67438795915422,"sku":"20-0630-00 + 20-0700","price":1348.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ E5LM \/ Standard Fuel Hanger seul","offer_id":67438795948190,"sku":"20-0632-00","price":768.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ E5LM \/ Hanger + FHST Surge Tank Add-On","offer_id":67438795980958,"sku":"20-0632-00 + 20-0701","price":1348.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-and-fhst-late-nissan-1.jpg?v=1790633038"},{"product_id":"radium-fuel-pump-hanger-89-05-mazda-mx-5","title":"Radium - Support de pompe à essence, 89-05 Mazda MX-5","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1020 Fuel Hanger 89-05 Mazda MX-5 Pumps Not Included\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1020.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fuel hanger completely replaces the factory in-tank fuel pump module and allows 1 or 2 aftermarket pumps to be used. The OEM fuel level sensor is reused. No modifications are required for fitment under the fuel pump access cover.\u003c\/p\u003e\n  \u003cbr\u003e\n\u003ch4\u003ePREVENTING FUEL STARVATION\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAlthough not very effective, the OEM internal fuel tank baffle is still used.\u003c\/li\u003e\n\u003cli\u003eUnlike the factory hanger, this includes a 1-piece anodized aluminum collector box that keeps fuel trapped around the pump inlet(s).\u003c\/li\u003e\n\u003cli\u003eThere are two 1-way fill valves incorporated in the bottom of the collector box that allows fuel in, but not out. Each 1-way fill valve flows 355 LPH.\u003c\/li\u003e\n\u003cli\u003eAs shown below, the collector box is constantly replenished with fuel returning from the pressure regulator.\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003cbr\u003e\n\u003ch4\u003ePORTS AND FITTINGS\u003c\/h4\u003e\n\u003cp\u003eThe \"PUMP OUT\" port is tapped with 7\/8\"-14 (10AN ORB) threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvided is an SAE quick connect hose end with barbs (shown below) for 89-97 MX-5 fuel lines.\u003c\/li\u003e\n\u003cli\u003eProvided is a 10AN ORB to SAE quick connect banjo fitting for 99-05 MX-5 fuel lines.\u003c\/li\u003e\n\u003cli\u003eAdditional 10AN ORB adapters fittings can be found \u003ca href=\"\/fr\/products\/radium-10an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \"FUEL RETURN\" port is tapped with 3\/4\"-16 (8AN ORB) threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvided is an SAE quick connect hose end with barbs (shown above) for 89-97 MX-5 fuel lines.\u003c\/li\u003e\n\u003cli\u003eProvided is an 8AN ORB to SAE quick connect banjo fitting for 99-05 MX-5 fuel lines.\u003c\/li\u003e\n\u003cli\u003eAdditional 8AN ORB adapters fittings can be found \u003ca href=\"\/fr\/products\/radium-8an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003cbr\u003e\n\u003ch4\u003eFUEL TANK VARIATIONS\u003c\/h4\u003e\n\u003cp\u003eThere are multiple fuel tank changes between the 89-05 MX-5. Anodized billet aluminum extension brackets (shown below) with distinct mounting configurations permit compatibility with all fuel tank variations. To retain the different OEM fuel level sensors, an extension mount (shown above) is provided for the later models that have deeper fuel tanks.\u003c\/p\u003e\n  \u003cbr\u003e\n\u003ch4\u003eFUEL PRESSURE REGULATOR\u003c\/h4\u003e\n\u003cp\u003eWhen installing the pump hanger into a 89-97 MX-5, the OEM fuel pressure regulator is retained. This is mounted on the fuel rail and has no direct correlation with the fuel pump hanger.\u003c\/p\u003e\n\u003cp\u003eWhen installing the pump hanger into a 99-05 MX-5, the OEM fuel pressure regulator will be removed from the system. An aftermarket FPR is required for these vehicles. There are 2 plug and play options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20-1022 FPR KIT, 99-05 MAZDA MX-5 found \u003ca href=\"\/fr\/products\/radium-fpr-kit-99-05-mazda-mx-5\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFUEL HANGER PLUMBING KIT, 89-05 MX-5\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003cbr\u003e\n\u003ch4\u003eFUEL FILTRATION\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThis system includes multiple pre-pump filters for all pumps.\u003c\/li\u003e\n\u003cli\u003eThis system does NOT eliminate the OEM \"post\" pump fuel filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003cbr\u003e\n\u003ch4\u003eELECTRICAL\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDepending on the fuel pump and fuel pressure, some single pump installations can re-use the OEM wiring.\u003c\/li\u003e\n\u003cli\u003eIt is recommended to upgrade the wiring to ensure the pump(s) are operating at their full potential.\u003c\/li\u003e\n\u003cli\u003eUniversal fuel pump wiring kits can be found \u003ca rel=\"noopener\" href=\"\/fr\/products\/radium-diy-fuel-pump-wiring-kit\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. Select one for each aftermarket fuel pump used.\u003c\/li\u003e\n\u003cli\u003eThe in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/li\u003e\n\u003cli\u003eThe anti-rotation stainless steel terminals easily handle the high current demand that compact bulkhead connectors lack.\u003c\/li\u003e\n\u003cli\u003eServiceable connections are hermetically sealed and impervious to all standard and exotic fuels.\u003c\/li\u003e\n\u003cli\u003eNon-conductive anodized aluminum acorn nuts (shown below) prevent accidental short circuiting.\u003cbr\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1025-03 \u0026amp; 20-1025-05 Fuel Hanger Plumbing Kit 89-05 Mazda MX-5\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1025.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eA large 8AN feed line runs around the backside of the fuel tank. This line mates to a new 6 micron microglass high flow fuel filter mounted in the OEM location using a billet mount. An 8AN PTFE fuel line runs from the fuel filter along that factory hard lines, as shown below.\u003c\/p\u003e\n\u003cp\u003eThis 8AN PTFE line feeds the RA-series fuel pressure regulator (FPR) mounted under the RH strut tower. From the FPR, an 8AN PTFE fuel line feeds the front port of a dead head aftermarket fuel rail (not included). The Mazda \u003ca href=\"\/fr\/products\/radium-fuel-rail-mazda-1-6l-b6\"\u003e1.6L B6 Fuel Rail\u003c\/a\u003e or Mazda \u003ca href=\"\/fr\/products\/radium-fuel-rail-mazda-1-8l-bp\"\u003e1.8L BP Fuel Rail\u003c\/a\u003e are sold separately. The OEM fuel feed line is repurposed as a high flow return line. The OEM fuel line connects directly to the FPR return fitting.\u003c\/p\u003e\n\u003cp\u003eA fuel pressure gauge mounts directly to the feed line for easy adjustment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Hanger seul (Pumps Not Included)","offer_id":67438796013726,"sku":"20-1020","price":884.0,"currency_code":"CAD","in_stock":true},{"title":"Bundle Avec Filtre inox Kit de plomberie","offer_id":67438796046494,"sku":"20-1020 + 20-1025-03","price":1928.0,"currency_code":"CAD","in_stock":true},{"title":"Bundle Avec Filtre microfibre de verre Kit de plomberie","offer_id":67438796079262,"sku":"20-1020 + 20-1025-05","price":1899.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-89-05-mazda-mx-5-1.jpg?v=1790633059"},{"product_id":"radium-fuel-pump-adapter-for-toyota-hangers","title":"Radium - Fuel Pump Adapter pour Toyota Hangers","description":"\u003cp\u003eThe Radium Engineering anodized aluminum adapter allows a 6AN hose to be used with many OEM Toyota fuel pump housing outlets including Lexus, Scion, and Lotus 2ZZ-GE variations. This style of pump module design by Toyota is found on almost every model since 1996 and is still used currently in many vehicles. We cannot confirm all vehicles so research may be required.\u003c\/p\u003e\n\u003cp\u003eNo modification to the fuel pump housing or vehicle is required. As shown below, the Radium Engineering adapter features an integrated O-ring for a leak-free positive connection.\u003c\/p\u003e\n\u003cp\u003eThe adapter fitting was designed to be ultra low-profile so the 6AN mating hose will have the best chance to fit underneath the OEM fuel pump access cover.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Toyota Hanger Outlet Adapter 6AN Male","offer_id":67438701904030,"sku":"20-0032","price":58.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-adapter-for-toyota-hangers-1.jpg?v=1790633113"},{"product_id":"radium-14-19-c7-corvette-fuel-pump-hanger","title":"Radium - Support de pompe à essence, 14-19 C7 Corvette","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1010 Fuel Hanger 14-19 Corvette Pumps Not Included\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1010.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle is required for installation. A second pump add-on option is available and sold separately. Plumbing kits are available to simplify the installation process and provide high flow fuel lines and fittings.\u003c\/p\u003e\n  \u003cp\u003eIf 2 aftermarket pumps are required, the dual pump add-on listed below must also be purchased. Choosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe fuel pump outlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate.\u003c\/li\u003e\n\u003cli\u003eThe included fuel pump outlet fitting is 8AN male.\u003c\/li\u003e\n\u003cli\u003eThe fuel return inlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate.\u003c\/li\u003e\n\u003cli\u003eThe included fuel return inlet fitting is 6AN male.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the surrounding area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREVENTING FUEL STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. This ensures the pump has adequate fuel available, even during aggressive driving. The internal pump is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe consistent crossover fuel scavenged from the passive side of the fuel tank.\u003c\/li\u003e\n\u003cli\u003eThe constant low pressure returning fuel from the fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eTwo 1-way fill valves on the bottom of the collector allow fuel in, but not out. Each  valve flows 355LPH keeping the collector as full as the current fuel tank level.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0937 Dual Pump Add-On Mid 2003-2019 Corvette\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0937.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis is a dual pump add-on to the fuel hanger listed above. It includes another 'independent' collector specific for pump 2. The architecture of the Corvette fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Each pump is sent into the tank one by one. The use of SAE quick connectors makes the installation process much easier.\u003c\/p\u003e\n\u003cp\u003eBoth fuel pumps outlets merge into the single 10AN ORB outlet of the CNC machined fuel hat. And because of the check valves on the pump outlets, fuel pump staging is permitted. The provided in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: Part number 20-1010 must be purchased to use this add-on.\u003c\/em\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1011-03 \u0026amp; 20-1011-05 Fuel Hanger Plumbing Kit 14-19 C7 Corvette\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1011-0X.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese kits provide all necessary plumbing to and from the engine including a fuel filter, fuel pressure regulator, fuel lines, adapter fittings, and mounting hardware. \u003cbr\u003e\u003cbr\u003eFrom the fuel hanger pump outlet, 8AN PTFE fuel hose runs down to a chassis-mounted fuel filter near the fuel tank. The fuel filter will be assembled with a check valve and a stainless fuel filter element that can be cleaned and reused as needed. A tee is secured inline with the feed that permits the use of the OEM pressure sensor for tuning.\u003c\/p\u003e\n\u003cp\u003eFrom the fuel filter another 8AN PTFE fuel hose runs through the tunnel parallel to the torque tube and into the fuel pressure regulator. Thermal insulation is included to protect the hose and vacuum tubing from the exhaust system.\u003c\/p\u003e\n\u003cp\u003eThe FPR secures to an aluminum mount near the brake master cylinder. The FPR has multiple high pressure ports. A SAE quick connect adapter is provided for connecting the FPR to the OEM HPFP using the stock fuel feed line. Adapter fittings and a fuel pressure gauge are provided to monitor and properly calibrate the FPR.\u003cbr\u003e\u003cbr\u003eThe OEM fuel feed line that runs from the tank to the engine bay is repurposed as a return line. Adapters fittings are provided for connecting both ends of the return line to the FPR and the Fuel Hanger.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Pompe simple Hanger (Hanger seul) \/ No Kit de plomberie","offer_id":67620330733726,"sku":"20-1010","price":565.0,"currency_code":"CAD","in_stock":true},{"title":"Pompe simple Hanger (Hanger seul) \/ Add Kit de plomberie - Filtre inox (20-1011-03)","offer_id":67620330766494,"sku":"20-1010 + 20-1011-03","price":1609.0,"currency_code":"CAD","in_stock":true},{"title":"Pompe simple Hanger (Hanger seul) \/ Add Kit de plomberie - Filtre microfibre de verre (20-1011-05)","offer_id":67620330799262,"sku":"20-1010 + 20-1011-05","price":1580.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ No Kit de plomberie","offer_id":67620330832030,"sku":"20-1010 + 20-0937","price":928.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ Add Kit de plomberie - Filtre inox (20-1011-03)","offer_id":67620330864798,"sku":"20-1010 + 20-0937 + 20-1011-03","price":1972.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ Add Kit de plomberie - Filtre microfibre de verre (20-1011-05)","offer_id":67620330897566,"sku":"20-1010 + 20-0937 + 20-1011-05","price":1943.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-14-19-c7-corvette-fuel-pump-hanger-1.jpg?v=1790633153"},{"product_id":"radium-cts-v-fuel-pump-access-cover","title":"Radium - Fuel Pump Access Cover, Cadillac CTS-V","description":"\u003cp\u003eThis kit permits the fuel pump to be serviced without dropping the gas tank. It simply seals the cabin and protects the fuel pump module. The lightweight aluminum cover was designed to conform to the sheet metal allowing the rear bench seat to be reused.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Access Cover Cadillac CTS-V","offer_id":67438702657694,"sku":"20-0835","price":72.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-cts-v-fuel-pump-access-cover-1.jpg?v=1790633158"},{"product_id":"radium-fuel-pump-hanger-90-93-acura-integra-88-91-honda-civic-cr-x","title":"Radium - Support de pompe à essence, 90-93 Acura Integra, 88-91 Honda Civic CR-X","description":"\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation. Dual pump add-on kits are available to add a second pump to the hanger, and a fuel hanger connection kit is available to plumb the hanger to the stock fuel lines.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1790 Fuel Hanger Convient pour Walbro GSS342 or AEM 50-1200\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1790.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e\u003cspan\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump is positioned in the factory collector bowl for fuel starvation protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORT FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. The preinstalled 6AN male fitting permits an aftermarket feed line and\/or connects to the plumbing kit listed below. For other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-8an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. The provided -6AN male fitting permits an aftermarket return line and\/or connects to the plumbing kit listed below. For other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-6an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the trunk sheet metal.\u003c\/p\u003e\n\u003cp\u003eThis hanger is configured to be used with 1 aftermarket fuel pump. If 2 aftermarket pumps are required, order the dual pump add-on part number 20-1796 in addition to the hanger.\u003c\/p\u003e\n\u003cp\u003eIf installing a brushless pump, the dual pump add-on can NOT be used due to the extra brushless controller wires.\u003c\/p\u003e\n\u003cp\u003eChoosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure. The pumps below are compatible:\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed ant-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1792 Fuel Hanger Convient pour Walbro F90000267\/274\/285 or Brushless Pumps\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1792.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e\u003cspan\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump is positioned in the factory collector bowl for fuel starvation protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORT FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. The preinstalled 6AN male fitting permits an aftermarket feed line and\/or connects to the plumbing kit listed below. For other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-8an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. The provided -6AN male fitting permits an aftermarket return line and\/or connects to the plumbing kit listed below. For other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-6an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the trunk sheet metal.\u003c\/p\u003e\n\u003cp\u003eThis hanger is configured to be used with 1 aftermarket fuel pump. If 2 aftermarket pumps are required, order the dual pump add-on part number 20-1797 in addition to the hanger.\u003c\/p\u003e\n\u003cp\u003eIf installing a brushless pump, the dual pump add-on can NOT be used due to the extra brushless controller wires.\u003c\/p\u003e\n\u003cp\u003eChoosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure. The pumps below are compatible:\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed ant-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1796 Dual Pump Add-On Convient pour Walbro GSS342 or AEM 50-1200\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1796.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis kit can be used to install a second brushed pump to your hanger. Part number 20-1790 is required to use this add-on. If a brushless pump was installed, a dual pump add-on can NOT be used due to the extra brushless controller wires. \u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAn electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves with the following pumps, staging is permitted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1797 Dual Pump Add-On Convient pour Walbro F90000267\/274\/285\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1797.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis kit can be used to install a second brushed pump to your hanger. Part number 20-1790 is required to use this add-on. If a brushless pump was installed, a dual pump add-on can NOT be used due to the extra brushless controller wires. \u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAn electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves with the following pumps, staging is permitted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1795 Fuel Hanger Connection Kit, 90-93 Integra, 88-91 Civic CR-X\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1795.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Fuel Hanger Connection Kit supplies the necessary hardware to connect a Radium Fuel Pump Hanger to the OEM fuel hard lines under the vehicle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA 6AN feed line is constructed to mate to the OEM flare fitting on the side of the fuel tank. This eliminates the long integrated hard line brazed to the OEM fuel hat. Also, a 5AN return line is constructed to mate to the hard line barb on the side of the fuel tank.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Pompe simple (Support seul) \/ No Connection Kit","offer_id":67620331094174,"sku":"20-1790","price":290.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Pompe simple (Support seul) \/ Add Fuel Hanger Connection Kit (20-1795)","offer_id":67620331126942,"sku":"20-1790 + 20-1795","price":406.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Configuration double pompe (Module inclus) \/ No Connection Kit","offer_id":67620331159710,"sku":"20-1790 + 20-1796","price":493.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Configuration double pompe (Module inclus) \/ Add Fuel Hanger Connection Kit (20-1795)","offer_id":67620331192478,"sku":"20-1790 + 20-1796 + 20-1795","price":609.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Pompe simple (Support seul) \/ No Connection Kit","offer_id":67620331225246,"sku":"20-1792","price":312.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Pompe simple (Support seul) \/ Add Fuel Hanger Connection Kit (20-1795)","offer_id":67620331258014,"sku":"20-1792 + 20-1795","price":428.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Configuration double pompe (Module inclus) \/ No Connection Kit","offer_id":67620331290782,"sku":"20-1792 + 20-1797","price":536.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Configuration double pompe (Module inclus) \/ Add Fuel Hanger Connection Kit (20-1795)","offer_id":67620331323550,"sku":"20-1792 + 20-1797 + 20-1795","price":652.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-90-93-acura-integra-88-91-honda-civic-cr-x-1.jpg?v=1790633173"},{"product_id":"radium-fuel-pump-access-covers-89-05-mazda-mx-5","title":"Radium - Fuel Pump Access Cover, 89-05 Mazda MX-5","description":"\u003cp\u003eThese fuel pump access covers are a direct replacement for the factory steel plates. They simply shield and protect the fuel pump module.\u003c\/p\u003e\n\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Access Cover 89-97 Mazda MX-5","offer_id":67438702952606,"sku":"20-0836","price":130.0,"currency_code":"CAD","in_stock":true},{"title":"Fuel Pump Access Cover 98-05 Mazda MX-5","offer_id":67438702985374,"sku":"20-0837","price":130.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-access-covers-89-05-mazda-mx-5-1.jpg?v=1790633180"},{"product_id":"radium-fuel-pump-hanger-honda-del-sol","title":"Radium - Support de pompe à essence, Honda Del Sol","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-3790 \u0026amp; 20-3792 Fuel Pump Hangers\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-3790.jpg\"\u003e\u003cbr\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-3792_1.jpg\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation. All fittings are machined low enough to clear the fuel pump access cover. The fuel pump is positioned in the factory collector bowl for fuel starvation protection.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORTS AND FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. The preinstalled 6AN male fitting permits an aftermarket feed line and\/or connects to the plumbing kit listed below. For other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-8an-orb-fittings\"\u003eHERE\u003c\/a\u003e. \u003cbr\u003e\u003cbr\u003eThe return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. The provided 6AN male fitting permits an aftermarket return line and\/or connects to the plumbing kit listed below. For other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-6an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-3796 \u0026amp; 20-3797 Dual Pump Add-Ons\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-3796.jpg\"\u003e\u003cbr\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-3797.jpg\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis dual pump add-on kit can be purchased along with the 20-3790 fuel pump hanger to allow a second pump to be installed into the tank. The fuel pump hanger is required to use this add-on. If a brushless pump is being installed the system is limited to one pump and the dual pump add-on can NOT be used due to the extra brushless controller wires. \u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult.\u003c\/p\u003e\n\u003cp\u003eAn electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves with the following pumps, staging is permitted.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-3795 Fuel Hanger Connection Kit, Honda Del Sol\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-3795.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Fuel Hanger Connection Kit connects to the factory fuel hard lines. A 6AN feed line is constructed to mate to the OEM flare fitting on the side of the fuel tank. This eliminates the restrictive banjo fitting. Also, adapter fittings are secured to the 6AN return fitting for reusing the factory fuel return line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Pompe simple (Support seul) \/ No Connection Kit","offer_id":67620279877790,"sku":"20-3790","price":333.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Pompe simple (Support seul) \/ Add Fuel Hanger Connection Kit (20-3795)","offer_id":67620279910558,"sku":"20-3790 + 20-3795","price":449.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Configuration double pompe (Module inclus) \/ No Connection Kit","offer_id":67620279943326,"sku":"20-3790 + 20-3796","price":536.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Configuration double pompe (Module inclus) \/ Add Fuel Hanger Connection Kit (20-3795)","offer_id":67620279976094,"sku":"20-3790 + 20-3796 + 20-3795","price":652.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Pompe simple (Support seul) \/ No Connection Kit","offer_id":67620280008862,"sku":"20-3792","price":355.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Pompe simple (Support seul) \/ Add Fuel Hanger Connection Kit (20-3795)","offer_id":67620280041630,"sku":"20-3792 + 20-3795","price":471.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Configuration double pompe (Module inclus) \/ No Connection Kit","offer_id":67620280074398,"sku":"20-3792 + 20-3797","price":580.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Configuration double pompe (Module inclus) \/ Add Fuel Hanger Connection Kit (20-3795)","offer_id":67620280107166,"sku":"20-3792 + 20-3797 + 20-3795","price":696.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-honda-del-sol-1.jpg?v=1790633198"},{"product_id":"radium-fuel-pump-hanger-94-01-acura-integra-92-00-honda-civic","title":"Radium - Support de pompe à essence, 94-01 Acura Integra, 92-00 Honda Civic","description":"\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation. An optional dual pump add-on kit is available to add a second fuel pump to your hanger.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eINDEPENDENT INSTALLATION VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/QKP6C06q6qQ?si=-KIgG9YiECm1LNn3\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0790-00 Fuel Hanger Integra Civic Convient pour Walbro GSS342 or AEM 50-1200\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0790-00.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003c\/p\u003e\n\u003cp\u003eThe fuel pump is positioned in the factory collector bowl for fuel starvation protection. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORTS \u0026amp; FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. There are multiple adapter fittings included for the outlet. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe preinstalled -6AN male fitting permits an aftermarket feed line.\u003c\/li\u003e\n\u003cli\u003eThe 8.5mm barbed adapter fitting permits the (94-95 Integra\/92-95 Civic) OEM feed line to be reused.\u003c\/li\u003e\n\u003cli\u003eThe SAE quick connect fitting permits the (96-01 Integra\/96-00 Civic) OEM feed line to be reused.\u003c\/li\u003e\n\u003cli\u003eFor other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-8an-orb-fittings\"\u003eHERE\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe return inlet is tapped for 4AN ORB (7\/16\"-20) female threads on the top plate. There are 2 fittings included for the return port.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe preinstalled 6.5mm barbed fitting permits the OEM return line to be reused.\u003c\/li\u003e\n\u003cli\u003eThe provided -6AN male fitting permits an aftermarket return line.\u003c\/li\u003e\n\u003cli\u003eFor other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-4an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the fuel pump access cover. The 96-01 Integra and 96-00 Civic require the OEM return hose to be extended to reach the hanger.\u003c\/p\u003e\n\u003cp\u003eThe hanger is configured to be used with 1 aftermarket fuel pump. If 2 aftermarket pumps are required, the supplementary dual pump add-on 20-0796-00 must also be purchased. Choosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0792-00 Fuel Hanger Integra Civic Convient pour Walbro F90000267\/274\/285\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0792-00.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003c\/p\u003e\n\u003cp\u003eThe fuel pump is positioned in the factory collector bowl for fuel starvation protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePORTS \u0026amp; FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. There are multiple adapter fittings included for the outlet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe preinstalled -6AN male fitting permits an aftermarket feed line.\u003c\/li\u003e\n\u003cli\u003eThe 8.5mm barbed adapter fitting permits the (94-95 Integra\/92-95 Civic) OEM feed line to be reused.\u003c\/li\u003e\n\u003cli\u003eThe SAE quick connect fitting permits the (96-01 Integra\/96-00 Civic) OEM feed line to be reused.\u003c\/li\u003e\n\u003cli\u003eFor other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-8an-orb-fittings\"\u003eHERE\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe return inlet is tapped for 4AN ORB (7\/16\"-20) female threads on the top plate. There are 2 fittings included for the return port.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe preinstalled 6.5mm barbed fitting permits the OEM return line to be reused.\u003c\/li\u003e\n\u003cli\u003eThe provided -6AN male fitting permits an aftermarket return line.\u003c\/li\u003e\n\u003cli\u003eFor other compatible adapter fittings, click \u003ca href=\"\/fr\/products\/radium-4an-orb-fittings\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the fuel pump access cover. The 96-01 Integra and 96-00 Civic require the OEM return hose to be extended to reach the hanger.\u003c\/p\u003e\n\u003cp\u003eThe hanger is configured to be used with 1 aftermarket fuel pump. If 2 aftermarket pumps are required, the supplementary dual pump add-on 20-0797-00 must also be purchased. Choosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003ca href=\"\/fr\/collections\/fuel-pumps-hangers\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0796-00 Dual Pump Add-On Convient pour Walbro GSS342 or AEM 50-1200\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0796-00.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese dual pump add-on kits allow you to install a second fuel pump onto your Radium fuel pump hanger. This kit requires hanger part number 20-0790-00.\u003c\/p\u003e\n\u003cp\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult.\u003c\/p\u003e\n\u003cp\u003eIt is NOT possible to fit 2 Walbro 39\/50 DCSS fuel pumps (F90000267\/274\/285) next to each other in the Honda fuel tank. The internal OEM collector bowl is physically too narrow. But when installed inline, these large base pumps can fit, as shown.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe rear pump assembly is placed in the tank first. A tool is provided to keep this pump back and away while inserting the front pump. An electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves, fuel pump staging is permitted.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0797-00 Dual Pump Add-On Convient pour Walbro F90000267\/274\/285\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg class=\"myImages\" id=\"myImg\" style=\"width: 200px;\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0797-00.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese dual pump add-on kits allow you to install a second fuel pump onto your Radium fuel pump hanger. This kit requires hanger part number 20-0792-00.\u003c\/p\u003e\n\u003cp\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult. Furthermore, it is NOT possible to fit 2 Walbro 39\/50 DCSS fuel pumps (F90000267\/274\/285) next to each other in the Honda fuel tank. The internal OEM collector bowl is physically too narrow. But when installed inline, these large base pumps can fit, as shown.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe rear pump assembly is placed in the tank first. A tool is provided to keep this pump back and away while inserting the front pump. An electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves, fuel pump staging is permitted.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Pompe simple (Support seul)","offer_id":67620279746718,"sku":"20-0790-00","price":333.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro GSS342 \/ AEM 50-1200 \/ Configuration double pompe (Module inclus)","offer_id":67620279779486,"sku":"20-0790-00 + 20-0796-00","price":536.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Pompe simple (Support seul)","offer_id":67620279812254,"sku":"20-0792-00","price":355.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ Brushless \/ Configuration double pompe (Module inclus)","offer_id":67620279845022,"sku":"20-0792-00 + 20-0797-00","price":580.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-94-01-acura-integra-92-00-honda-civic-1.jpg?v=1790633216"},{"product_id":"radium-fuel-pump-hanger-08-17-gm","title":"Radium - Support de pompe à essence, 08-17 GM Cars","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1320 \u0026amp; 20-1322 Fuel Pump Hangers, 08-17 GM\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\n  \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1320.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003cbr\u003e\n  \u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1322.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\n  \u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e\u003cspan\u003eThis fuel hanger completely replaces the factory in-tank fuel pump module and allows 1, 2, or 3 aftermarket pumps to be used. All OEM sensors can be reused.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL STARVATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 1-piece anodized aluminum collector box keeps fuel trapped around the pump inlet(s)\u003c\/li\u003e\n\u003cli\u003eThere are three 1-way fill valves incorporated in the bottom of the collector box that allows fuel in, but not out. Each 1-way fill valve flows 355 LPH\u003c\/li\u003e\n\u003cli\u003eThe collector box is constantly replenished with fuel returning from the pressure regulator\u003c\/li\u003e\n\u003cli\u003eThe collector box is constantly replenished with fuel coming from the jet pump crossover line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePORTS AND FITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are 2 pump outlet ports that are both tapped with 3\/4\"-16 (8AN ORB) threads. The first port can be used to reconnect the factory fuel feed line. Because the OEM fuel feed line has an integrated fuel pressure sensor, this feature is critical for many applications. There are 2 different SAE quick connect fittings provided to adapt to the specific vehicle. The second port can be used to route another feed line for increased flow. This port comes preinstalled with an 8AN ORB plug but a spare 8AN ORB to 6AN Male fitting is provided. The return port is tapped with 3\/4\"-16 (8AN ORB) threads. Provided is an 8AN ORB to 6AN Male banjo fitting. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVENTURI JET PUMP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM venturi jet pump in the return line creates a restriction that can impact fuel pressure reliability. The siphon system has been replaced and redesigned to eliminate this return line restriction but still effectively scavenges fuel. This means higher flowing pumps can safely be used without fuel pressure issues. Depending on fuel pressure, the venturi jet pump will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps. To reconnect the internal OEM fuel crossover transfer line, 2 different SAE quick connect fittings are provided to cover all compatible vehicles. The fuel pump hanger plumbing kits (listed below) include fuel filters with a built-in check valve. If not purchasing one of these plumbing kits and it is important for fuel pressure to hold steady after the engine is shut down, install one of these \u003ca href=\"\/fr\/products\/radium-check-valve-fuel-filter-conversion-kit\"\u003echeck valves\u003c\/a\u003e in your fuel system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL PRESSURE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis system eliminates the OEM fuel pressure regulator inside the stock unit.\u003c\/li\u003e\n\u003cli\u003eThis system requires the use of an \u003ca href=\"\/fr\/collections\/universal-pressure-regulators-1\"\u003eaftermarket fuel pressure regulator\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eA fuel pressure regulator is included in the plumbing kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFILTRATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis system includes pre-pump filtration for all 3 pumps. As shown below, fuel cannot pass between the 3 independent filtration chambers (A, B, C). If less than 3 pumps are installed, the empty port does NOT need to blocked off.\u003c\/p\u003e\n\u003cp\u003eThis system eliminates the OEM \"post\" pump filter. A low-micron \u003ca href=\"\/fr\/products\/radium-high-flow-in-line-fuel-filter-10an-orb\"\u003eaftermarket fuel filter\u003c\/a\u003e should be installed downstream to protect the injectors from debris. A post-pump fuel filter is included in the plumbing kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES ABOUT WIRING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe studs feature anti-rotation electrical terminals\u003c\/li\u003e\n\u003cli\u003eSingle fuel pump installations can re-use the OEM fuel pump controller wiring\u003c\/li\u003e\n\u003cli\u003eIt is recommended to upgrade the wiring to ensure the pump(s) are operating at their full potential\u003c\/li\u003e\n\u003cli\u003eUniversal fuel pump wiring kits can be found \u003ca rel=\"noopener\" href=\"\/fr\/products\/radium-diy-fuel-pump-wiring-kit\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. Select one for each aftermarket fuel pump used\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1325-03 \u0026amp; 20-1325-05 FUEL HANGER PLUMBING KITS, 08-15 CTS-V\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1325-0X.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe CTS-V plumbing kits feature dual 6AN PTFE feed lines that route from the fuel hat to the fuel filter. Two fuel lines are required here for the following reasons:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA single 8AN fuel line will not fit between the fuel tank and the unibody. The larger combined surface area of two 6AN lines Convient pour nicely.\u003c\/li\u003e\n\u003cli\u003eThe back half of the OEM fuel line is reused. The stock fuel line incorporates the OEM fuel pressure sensor that is needed for ECU diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCaractéristiques :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepurposed stock feed line as a 6AN return line\u003c\/li\u003e\n\u003cli\u003eAluminum hose retainer bracket.\u003c\/li\u003e\n\u003cli\u003eFuel filter incorporates a built-in check valve\u003c\/li\u003e\n\u003cli\u003eA thermal insulating sleeve is included to protect against chaffing and excessive exhaust heat.\u003c\/li\u003e\n\u003cli\u003eAnodized bolt-in fuel filter mounting bracket does NOT require any permanent vehicle modifications.\u003c\/li\u003e\n\u003cli\u003eA fuel pressure regulator and pressure gauge mounts directly to the RH fuel rail. \u003ca href=\"\/fr\/products\/radium-fuel-rails-gm-ls9-lsa\"\u003eRadium Engineering 20-0362\u003c\/a\u003e fuel rails are required (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1326-03 \u0026amp; 20-1326-05 FUEL HANGER PLUMBING KIT, 10-15 CAMARO LS3\/LS7\/L99\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1326-XX.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThe Camaro plumbing kits feature dual 6AN PTFE feed lines that route from the fuel hat to the fuel filter. Two fuel lines are required here for the following reasons:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA single 8AN fuel line will not fit between the fuel tank and the unibody. The larger combined surface area of two 6AN lines Convient pour nicely\u003c\/li\u003e\n\u003cli\u003eThe back half of the OEM fuel line is reused. The stock fuel line incorporates the OEM fuel pressure sensor that is needed for ECU diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\nThe rest of the stock fuel feed line is repurposed as a 6AN return line. \u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eFEATURES\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThe kit includes 4 green anodized hose retaining adapters with clamps.\u003c\/li\u003e\n\u003cli\u003eThe included fuel filter incorporates a built-in check valve.\u003c\/li\u003e\n\u003cli\u003eThe Camaro specific fuel filter mount does NOT require any permanent vehicle modifications.\u003c\/li\u003e\n\u003cli\u003eA thermal insulating sleeve is included to protect against chaffing and excessive exhaust heat.\u003c\/li\u003e\n\u003cli\u003eA billet aluminum clamp secures the 8AN PTFE hose downstream away from the header.\u003c\/li\u003e\n\u003cli\u003eThe 8AN PTFE line from the fuel filter feeds the RH fuel rail.\u003c\/li\u003e\n\u003cli\u003eA fuel pressure regulator and pressure gauge mounts directly to the LH fuel rail.\u003c\/li\u003e\n\u003cli\u003eRadium Engineering fuel rails and fuel rail plumbing kits are required (sold separately).\u003c\/li\u003e\n\u003cli\u003eA 6AN PTFE fuel line is provided that connects the FPR return port to the OEM fuel feed hard line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"AEM 50-1220 \/ DW440 \/ None (Hanger seul)","offer_id":67438796931230,"sku":"20-1320","price":870.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ CTS-V Plumbing (Filtre inox)","offer_id":67438796963998,"sku":"20-1320 + 20-1325-03","price":1957.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ CTS-V Plumbing (Filtre microfibre de verre)","offer_id":67438796996766,"sku":"20-1320 + 20-1325-05","price":1928.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ 10-15 Camaro Plumbing (Stainless)","offer_id":67438797029534,"sku":"20-1320 + 20-1326-03","price":1870.0,"currency_code":"CAD","in_stock":true},{"title":"AEM 50-1220 \/ DW440 \/ 10-15 Camaro Plumbing (Microglass)","offer_id":67438797062302,"sku":"20-1320 + 20-1326-05","price":1841.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ None (Hanger seul)","offer_id":67438797095070,"sku":"20-1322","price":942.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ CTS-V Plumbing (Filtre inox)","offer_id":67438797127838,"sku":"20-1322 + 20-1325-03","price":2030.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ CTS-V Plumbing (Filtre microfibre de verre)","offer_id":67438797160606,"sku":"20-1322 + 20-1325-05","price":2001.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ 10-15 Camaro Plumbing (Stainless)","offer_id":67438797193374,"sku":"20-1322 + 20-1326-03","price":1943.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000267\/274\/285 \/ 10-15 Camaro Plumbing (Microglass)","offer_id":67438797226142,"sku":"20-1322 + 20-1326-05","price":1914.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-hanger-08-17-gm-1.jpg?v=1790633226"},{"product_id":"radium-03-13-corvette-fuel-pump-hanger","title":"Radium - Support de pompe à essence, 03-13 Corvette","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0980 Fuel Hanger, Mid 2003-2013 Corvette\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0980n_1.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis fuel pump hanger is configured to be used with 1 aftermarket fuel pump. If 2 aftermarket pumps are required, the supplementary \"dual pump add-on\" (20-0937 listed below) would also be required. Choosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"\/fr\/collections\/universal-pressure-regulators-1\"\u003efuel pressure regulator\u003c\/a\u003e and external (low micron) \u003ca href=\"\/fr\/products\/radium-high-flow-in-line-fuel-filter-10an-orb\"\u003efuel filter\u003c\/a\u003e must be purchased separately. Optionally, the plumbing kits (see below) include both of these items\u003cem\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eFITTINGS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe fuel pump outlet is threaded 10AN ORB (7\/8\"-14) female\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe fuel return inlet is threaded 8AN ORB (3\/4\"-16) female\u003c\/li\u003e\n\u003cli\u003eAn 8AN male adapter is provided for the pump outlet\u003c\/li\u003e\n\u003cli\u003eA 6AN male adapter is provided for the return inlet\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFUEL STARVATION PROTECTION\u003c\/h4\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. While results for this will vary as fuel level decreases, this ensures the pump has adequate fuel available, even during aggressive driving. The internal pump is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe consistent crossover fuel scavenged from the passive side of the fuel tank\u003c\/li\u003e\n\u003cli\u003eThe constant low pressure returning fuel from the fuel pressure regulator\u003c\/li\u003e\n\u003cli\u003eTwo 1-way fill valves on the bottom of the collector allow fuel in, but not out. Each 1-way valve flows 355LPH keeping the collector as full as the current fuel tank level\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eELECTRICAL\u003c\/h4\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eNOTES\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSingle fuel pump installations can re-use the OEM fuel pump wiring\u003c\/li\u003e\n\u003cli\u003eIt is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at maximum potential\u003c\/li\u003e\n\u003cli\u003eUniversal fuel pump wiring kits can be found \u003ca href=\"\/fr\/products\/radium-diy-fuel-pump-wiring-kit\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. Select one for each aftermarket pump\u003c\/li\u003e\n\u003cli\u003eIf fuel pressure ever needs to be adjusted lower than the OEM specification, purchase this FPR bypass located \u003ca href=\"\/fr\/products\/radium-fpr-bypass-mid-2003-2013-corvette\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0937 Dual Pump Add-On Mid 2003-2019 Corvette\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0937.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThis is a dual pump add-on to the fuel hanger listed above. It includes another independent collector specific for pump 2.\u003c\/p\u003e\n\u003cp\u003eBoth fuel pumps outlets merge into the single 10AN ORB outlet of the CNC machined fuel hat. And because of the check valves on the pump outlets, fuel pump staging is permitted.\u003c\/p\u003e\n\u003cp\u003eThe provided in-tank wiring is insulated with high quality chemically resistant ETFE.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eNOTES\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003ePart number 20-0980 must be purchased to use the dual pump add-on. \u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eIf pressure ever needs to be adjusted lower than the factory setting, purchase this FPR Bypass \u003ca href=\"\/fr\/products\/radium-fpr-bypass-mid-2003-2013-corvette\"\u003eHERE.\u003c\/a\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThis is also a compatible dual pump add-on for the C7 Corvette fuel hanger, but the C7 requires a different hanger.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-0981-03, 20-0981-05, 20-0983-03 \u0026amp; 20-0983-05 Plumbing Kits\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-0981-0X_1.jpg\" style=\"width: 200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003eThese kits provide all necessary plumbing to and from the engine including a fuel filter, fuel pressure regulator, fuel lines, adapter fittings, and mounting hardware.\u003cbr\u003e\u003cbr\u003eFrom the fuel hanger pump outlet, 8AN PTFE fuel hose runs down to a chassis-mounted fuel filter near the fuel tank. \u003c\/p\u003e\n\u003cp\u003eFrom the fuel filter another 8AN PTFE fuel hose runs through the tunnel parallel to the torque tube and into the fuel pressure regulator (FPR). The hose is secured with stainless steel cushioned clamps. Furthermore, thermal insulation is included to protect the hose from the exhaust system. \u003c\/p\u003e\n\u003cp\u003eAs shown above, the FPR secures to a billet aluminum mount near the brake master cylinder. NOTE: Because the brake master cylinder changed between 2008 and 2009, the mounting bracket changed accordingly (see P\/Ns). The FPR has multiple high pressure ports. A SAE quick connect adapter is provided for connecting the FPR to the OEM fuel rail using the stock fuel feed line.\u003c\/p\u003e\n\u003cp\u003eNOTE: If aftermarket fuel rails are used, Radium Engineering recommends feeding each of the fuel rail front ports independently and plugging the rear ports. Because of engine variances, no parts are included for this procedure.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA fuel pressure gauge and adapter fittings are provided to monitor and properly calibrate the FPR.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM fuel feed \"hard\" line is repurposed as a return line. Adapters fittings and hose are provided for connecting both ends of the return line (FPR and Fuel Hanger).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: due to bell housing space interfering with fuel filter mounting, this kit is not Compatible avec automatic transmissions.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Pompe simple Hanger (Hanger seul) \/ No Kit de plomberie","offer_id":67620274405534,"sku":"20-0980","price":507.0,"currency_code":"CAD","in_stock":true},{"title":"Pompe simple Hanger (Hanger seul) \/ 03-08 Kit de plomberie - Filtre inox (20-0981-03)","offer_id":67620274438302,"sku":"20-0980 + 20-0981-03","price":1493.0,"currency_code":"CAD","in_stock":true},{"title":"Pompe simple Hanger (Hanger seul) \/ 03-08 Kit de plomberie - Filtre microfibre de verre (20-0981-05)","offer_id":67620274471070,"sku":"20-0980 + 20-0981-05","price":1464.0,"currency_code":"CAD","in_stock":true},{"title":"Pompe simple Hanger (Hanger seul) \/ 09-13 Kit de plomberie - Filtre inox (20-0983-03)","offer_id":67620274503838,"sku":"20-0980 + 20-0983-03","price":1493.0,"currency_code":"CAD","in_stock":true},{"title":"Pompe simple Hanger (Hanger seul) \/ 09-13 Kit de plomberie - Filtre microfibre de verre (20-0983-05)","offer_id":67620274536606,"sku":"20-0980 + 20-0983-05","price":1464.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ No Kit de plomberie","offer_id":67620274569374,"sku":"20-0980 + 20-0937","price":870.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ 03-08 Kit de plomberie - Filtre inox (20-0981-03)","offer_id":67620274602142,"sku":"20-0980 + 20-0937 + 20-0981-03","price":1856.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ 03-08 Kit de plomberie - Filtre microfibre de verre (20-0981-05)","offer_id":67620274634910,"sku":"20-0980 + 20-0937 + 20-0981-05","price":1827.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ 09-13 Kit de plomberie - Filtre inox (20-0983-03)","offer_id":67620274667678,"sku":"20-0980 + 20-0937 + 20-0983-03","price":1856.0,"currency_code":"CAD","in_stock":true},{"title":"Double pompe Setup (Includes Add-On Bracket) \/ 09-13 Kit de plomberie - Filtre microfibre de verre (20-0983-05)","offer_id":67620274700446,"sku":"20-0980 + 20-0937 + 20-0983-05","price":1827.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-03-13-corvette-fuel-pump-hanger-1.jpg?v=1790633251"},{"product_id":"radium-fuel-pump-install-kit-96-06-bmw","title":"Radium - Fuel Pump Install Kit, 96-06 BMW","description":"\u003cp\u003eor those looking to increase the power output of their BMW, this plug and play (bolt-in) fuel pump replacement solution uses the most popular high performance fuel pumps on the market. No permanent modifications to the fuel system are required for installation of this product. This kit features a 6061-T6 CNC billet aluminum sleeve that slides over the corresponding 39mm aftermarket pump to mimic the larger diameter of the BMW fuel pump. The machined rib snaps into the fuel pump hanger and properly locates the filter sock.\u003c\/p\u003e\n\u003cp\u003eThis kit features a 6061-T6 CNC billet aluminum sleeve that slides over the corresponding 39mm aftermarket pump to mimic the larger diameter of the BMW fuel pump. The machined rib snaps into the fuel pump hanger and properly locates the filter sock.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNOTES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe sleeve is designed for 39mm diameter (or DCSS 39\/50) pump bodies. For pumps not listed as compatible, measure the outside diameter to ensure it is correct before ordering. If the pump is greater or less than 39mm, this sleeve may not work.\u003c\/li\u003e\n\u003cli\u003eInstallation requires a filter sock. If your pump does not come with a filter sock, you can find compatible fuel pump filter socks, click \u003ca href=\"\/fr\/products\/radium-fuel-pump-inlet-filter-socks\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Walbro F90000262\/273 pump has the same connectors as the OEM BMW pump\u003c\/li\u003e\n\u003cli\u003eAftermarket pumps can potentially draw more current than what the BMW wiring was designed for. Fortunately, the factory 15A fuel pump fuse provides a safety net. It is a tell-tale to upgrade the corresponding wiring if this fuse ever blows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Pump Install Kit, 96-06 BMW M3","offer_id":67438704689310,"sku":"20-0884","price":87.0,"currency_code":"CAD","in_stock":true},{"title":"Fuel Pump Install Kit, BMW E46 non-M3","offer_id":67438704722078,"sku":"20-0894","price":87.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-pump-install-kit-96-06-bmw-1.jpg?v=1790633316"},{"product_id":"radium-venturi-jet-pump-kit","title":"Radium - Venturi Jet Pump Kit","description":"\u003cp\u003eThe Radium Engineering Jet Pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi creates vacuum in the perpendicular port. The effectiveness of this vacuum is demonstrated in the video above.\u003c\/p\u003e\n\u003cp\u003eOEM jet pumps are commonly found in vehicles with saddle-style fuel tanks (RWD or AWD drivetrains) and are designed for factory fuel pump flow rates. When a higher flowing pump is installed, the factory jet pumps becomes a major restriction in the return line causing high fuel pressure. In some cases drilling out the OEM jet pump can relieve the pressure, but the function of the jet pump is then compromised. The Radium Engineering Jet Pump is designed for high flow aftermarket pumps and includes different venturi orifices to match a wide range of pump flow rates.\u003c\/p\u003e\n\u003cp\u003eThe Radium Venturi Jet Pump uses a machined aluminum housing that is anodized and laser engraved. The kit includes 3 interchangeable orifices that were precisely calculated and vacuum pressure tested with multiple pump combinations. Consult the installation instructions for additional details on installation and use.\u003cbr\u003e\u003cbr\u003eAll 3 hose barbs connections are sized 8.5mm and are Compatible avec 5\/16\" or 3\/8\" ID hose. Rigid hoses will need to be small ID to ensure a seal. The crossover siphon port can be easily adapted to other common hoses as it uses 6AN ORB (9\/16-18 O-ring) female threads so it will accept any other 6AN ORB fitting.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePRODUCT VIDEO\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/IbfB264l1ww\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Venturi Jet Pump Kit","offer_id":67438709964958,"sku":"20-0180","price":130.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-venturi-jet-pump-kit-1.jpg?v=1790633661"},{"product_id":"radium-fuel-level-senders-and-accessories","title":"Radium - Fuel Level Senders and Accessories","description":"\u003cp\u003eThese fuel level sending units use the standard SAE 5-bolt mounting pattern, extensively used with all Radium fuel cell surge tanks. Suitable for use with gasoline, diesel, water, and all alcohol based fuels including methanol, ethanol, E85, etc. Full stainless steel sealed construction with magnetic float.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Level Sender 0-90 ohm 8.0in Shrouded","offer_id":67438714749086,"sku":"20-0847-203","price":145.0,"currency_code":"CAD","in_stock":true},{"title":"Fuel Level Sender 0-90 ohm 11.7in Shrouded","offer_id":67438714781854,"sku":"20-0847-297","price":145.0,"currency_code":"CAD","in_stock":true},{"title":"12AN ORB to 5-Bolt Adapter","offer_id":67438714814622,"sku":"20-0439","price":51.0,"currency_code":"CAD","in_stock":true},{"title":"Fuel Level Sender Block Off","offer_id":67438714847390,"sku":"20-0146","price":51.0,"currency_code":"CAD","in_stock":true},{"title":"Gasket 5-Bolt Fuel Level Sender","offer_id":67438714880158,"sku":"18-0020","price":14.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/radium-fuel-level-senders-and-accessories-1.jpg?v=1790633837"},{"product_id":"radium-fuel-pump-hanger-90-05-acura-nsx","title":"Radium - Support de pompe à essence, 90-05 Acura NSX","description":"\u003cp\u003eThis Radium Engineering fuel hanger replaces the stock fuel pump assembly in the 1990-2005 Acura NSX. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation. The fuel pump is positioned in the factory collector bowl for fuel starvation protection.\u003c\/p\u003e\n\u003cp\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. The preinstalled 6AN male fitting permits an aftermarket feed line and\/or connects to the factory plumbing. The return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. All fittings are machined low enough to clear the factory sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL:\u003c\/strong\u003e The custom designed anti-rotation stainless steel electrical studs easily handle high current demand. Non-conductive anodized aluminum acorn nuts prevent accidental short circuiting, and in-tank wiring is insulated with chemically resistant ETFE.\u003c\/p\u003e\n\u003cdiv style=\"margin-top: 20px; padding: 15px; border-left: 4px solid #d9534f; background-color: #fcf8e3; color: #8a6d3b; font-size: 0.9em;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed for off-road and motorsport competition use only. Professional installation recommended.\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left: 3px solid #e11d48; background: rgba(225, 29, 72, 0.05); padding: 12px 16px; margin: 20px 0; border-radius: 4px; font-size: 0.9em; color: #881337;\"\u003e\n  \u003cstrong\u003eNotice:\u003c\/strong\u003e This product is designed and intended strictly for off-road closed-course motorsport competition and racing vehicles.\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 \/ AEM 50-1200 (20-2790)","offer_id":67438717272222,"sku":"20-2790","price":355.0,"currency_code":"CAD","in_stock":true},{"title":"Walbro F90000 \/ Brushless (20-2792)","offer_id":67438717304990,"sku":"20-2792","price":355.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/20-2792.jpg?v=1790634033"},{"product_id":"radium-fuel-pump-hanger-bmw-e36","title":"Radium - Support de pompe à essence pour BMW E36 (3-Series \u0026 M3)","description":"\u003cdiv class=\"spec-box3\"\u003e\n\u003ch4\u003e20-1170 FUEL PUMP HANGER, BMW E36\u003c\/h4\u003e\n\u003cdiv style=\"float: left; width: 200px;\"\u003e\u003cimg src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1170_1.jpg\" style=\"width:200px;\" id=\"myImg\" class=\"myImages\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"poptext\"\u003e\n\u003cp\u003e\u003cspan\u003eThis Radium Engineering fuel hanger replaces both RH and LH fuel hat assemblies. It is Compatible avec 1 or 2 aftermarket fuel pumps. The kit reuses both passive side and active side fuel level sensors. It is also keeps a true saddle tank crossover system using new improved components. No cutting or modifying of the vehicle is required for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe merged fuel pump outlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate. An SAE quick connecter barb is provided to connect to the OEM feed line. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe fuel return inlet is tapped for 10AN ORB (7\/8\"-14) female threads on the top plate. An 8.5mm barbed adapter is provided to connect to the OEM return line.\u003c\/p\u003e\n\u003cp\u003eAll fittings are machined low enough to clear the surrounding area.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFUEL STARVATION PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeveral mechanisms work together to move fuel into the integrated collector and keep it full at all times. This ensures the pump(s) have adequate fuel available, even during aggressive driving. The integrated fuel tank collector is supplied with fuel from 3 different sources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe OEM collector bowl has a labyrinth. This keeps fuel from leaving the collector bowl when cornering.\u003c\/li\u003e\n\u003cli\u003eThe constant low pressure returning fuel from the regulator activates the venturi jet pump siphon and also fills the collector bowl.\u003c\/li\u003e\n\u003cli\u003eThe crossover fuel scavenged from the passive side of the tank from the venturi jet pump siphon is constantly filling the collector bowl.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePRV VENTURI JET PUMP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM venturi jet pump is replaced with an innovative Radium Engineering variation. The venturi jet pump has a built-in pressure relief valve to control excessive fuel return flow. This is a common problem when using high flow pump(s) at low loads. This excessive pressure would pop-off the OEM venturi jet pump connection and prevent fuel transfer, ultimately leaving the vehicle stranded. The PRV venturi jet pump also permits low static fuel pressures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. They have an anti-rotation feature that prevents the terminals from spinning. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"dm-motorsport-notice\" style=\"margin-top: 24px; padding: 14px 18px; background-color: #f8f9fa; border-left: 4px solid #e11d48; border-radius: 4px; font-size: 0.88em; color: #4b5563; line-height: 1.5;\"\u003e\n  \u003cstrong style=\"color: #111827;\"\u003eAvis motorsport et compétition :\u003c\/strong\u003e Ce composant de performance est conçu et destiné exclusivement à une utilisation en course sur circuit fermé hors route et compétition de sport automobile organisée.\n\u003c\/div\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":67632394764446,"sku":"20-1170","price":797.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/files\/20-1170E36b.jpg?v=1792461775"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6460\/0734\/collections\/20-1278_74c636e3-ba6f-478b-aae0-b6ec873d496f.jpg?v=1790048064","url":"https:\/\/dm-performance.ca\/fr\/collections\/radium-fuel-pump-hangers.oembed?page=2","provider":"DM Performance","version":"1.0","type":"link"}