PSR - 7982G Curved Point Mill Compressor Wheel Dual Ball Bearing Turbocharger
Standard / 1.15A/R T4 open
$2,060.00
Skip to product information
PSR - 7982G Curved Point Mill Compressor Wheel Dual Ball Bearing Turbocharger
$2,060.00
SKU: 102245219
- 6+6 Blade, New design Curved point mill billet compressor wheel which can obtain the most mass flow through the curved vanes and allow increases in engine horsepower output
- Dual ceramic ball bearing system provides optimal turbo response & better durability by reducing the shaft-motion
- 9 Blade G-Aero Inconel 713c turbine wheel
- Anti-Surge ported-shroud compressor inlet, cover integrated with the speed sensor and pressure ports
- Water fittings included with the super core
- 9 Options in Turbine Housing
- Installation Hardware: 3″ flange kit for Comp. Outlet, T4 Gasket/3″ flange kit for Turb. Inlet, 3.5″/4″ flange kit for Turb. Outlet and oil Drain Fitting kit are included by default
- Oil Feed Fitting(-4AN 1.65mm (0.065″) Orifice) included
Description
- Curved Point Mill Compressor Wheel: 79*98/101.56mm
- Turbine Wheel: 89*81.6mm
- Compressor Inlet: 5″ Hose
- Compressor Outlet: 3″ V-Band
- Turbine Inlet: 3″ V-Band/T4 open/ T4 divided
- Water Ports: -6AN
- Oil Feed Fitting(-4AN 1.65mm (0.065″) Orifice) included
- Oil Drain: -12AN(O-Ring sealed Flange Kit Included)
- 9 Options in Turbine Housing: T4(Open) 1.15 A/R; T4(Divided) 0.95A/R, 1.01 A/R, 1.15 A/R,? 1.28 A/R, 1.44 A/R; Dual v-band 1.01 A/R, 1.15 A/R and 1.28 A/R