Haltech - NEXUS R5 + Plug and Pin Set

Haltech - NEXUS R5 + Plug and Pin Set

$6,698.00
Skip to product information
Haltech - NEXUS R5 + Plug and Pin Set

Haltech - NEXUS R5 + Plug and Pin Set

$6,698.00
SKU: HT-195100

Nexus R5 is Haltech's flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).

 

  • 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)

  • 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)

  • 18 x peak/hold injector drivers (can be used as low side drive outputs)

  • 12 x low current ignition outputs (can be used as low side drive outputs)

  • 8 x low side drive outputs, PWM capable (DPOs)

  • 4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle

  • 23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup

  • Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters

  • 10 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs

  • 2 x onboard wideband controllers, supporting NTK and LSU4.9

  • 3 x CAN ports with switchable termination

  • Onboard data logging - Up to 300 channels of logging at sample rates up to 1ms (1kHz) with 512MB of internal memory

Plug and Pin Set - Suits Nexus R5
For use in converting an existing loom to suit NEXUS R5 applications.

 

VCU FEATURES:
  • Controlled via NSP (Nexus Software Programmer)
  • Long Term Learning
  • Stepper Motor Control
  • 4D Closed Loop Boost Control
  • Closed Loop CO2 Control
  • Rotational Idle
  • Launch Control
  • Traction Control
  • Anti-Lag
  • Dual Knock Control
  • Trans Brake Control
  • Race Timer
  • Multi Stage Fuel Injection
  • Multi-level Engine Protection
  • 6 Stage Nitrous Control
  • 4-sensor variable cam control
  • Intake Air Bleed Control
  • Flat Shift Control
  • Shock Travel & Ride Height Control
  • Advanced Torque Management
  • On-board Wi-Fi
AUTOMATIC TRANSMISSION CONTROL
  • Ford AODE/4R70W
  • GM 4L60E
  • GM 4L80E
  • Toyota A340E
  • Lenco
  • Liberty

 

Outputs: Up to 18 injector and 12 ignition

Suits: Racing application where advanced race features, data logging and power management control is required.

Includes: NEXUS R5 VCU, SurLok connectors (Red and Black), Wi-Fi antenna, mounting bolts, USB-C Cable, USB-C dust cap. Plug and pin set: AMP 26 pin key 1 and 3, 34 pin key 1 and 2, DTP-4.

 

 

 

Analog Voltage Inputs (AVI) 23
Differential Engine Position Inputs 2 (Trigger and Home)
Digital Pulsed Inputs (DPI) 0
Synchronized Pulsed Inputs (SPI) 10
Knock Sensor Inputs 2
On-board Wideband Controller 2 x NTK/LSU 4.9
Injection 18 (peak and hold)
Ignition 12
Ignition Switch Input 1
Engine Control Relay output 0
Total Digital Pulsed Outputs (DPO) 8
Half Bridge Outputs (HBO) 4 8A
On-Board PDM YES
25A High Current Outputs (HCO) 4
CAN Bus Networks 3
MAP sensor External
Inertia / G-Sensor YES
USB 2.0 USB-C
Low Power Up via Cable YES
Wi-Fi YES
Compatible with Haltech Connect App YES
Anti-Lag/Rotational Idle YES
Boost Control 4D Closed Loop
Closed Loop O2 Control Dual
CO2 Control YES
Drive-By-Wire Throttle Dual
Engine Protection Multi-Level
Flat Shift Support Advanced
Flex Fuel YES
Intake Air Bleed Control YES
Knock Control Dual
Launch Control YES
Long Term Learning Up to 4D
Nitrous Control Stages Up to 6
Race Timer YES
Rolling Anti-Lag YES
Shock Travel & Ride Height YES
Torque Management (Driveshaft and Engine RPM Targeting) YES
Traction Control YES
Trans Brake YES
Tuning Table Resolution 32x32x8 4D
Variable Cam Control Up to 4
Onboard storage 512MB

You may also like